Comments on Stalin223's Review

Stalin223 Saturday, May 29th, 2004 Period of Product Use: Less than a month 2 of 3 people found this review helpful. Paintball Experience: 6 months Similar Products Used: Tried a few cockers, and my buddy's angel. This kit quieted the gun down a lot. Marker Setup: Tippmann Custom 98 Low Pressure Kit Sucky Pure Energy regulator Flatline (duh) 38cu, 3000PSI solid steel HPA tank. Strengths: Lower ball breakage More shots per tank Weaknesses: Cost, the T-adapter was blocked by pipe, the kit wasn't bent right. Review: When I got the LP kit for my gun, I had to do 3 things which I shouldn't have had to in order to make it work. First I had to drill out the T adapter where the volumizer is, then I had to bend the damned regulator area a bit, they were off on the bend by 1/8th inches. After all that, the plastic cover you're supposed to put over the slot where the old cocking handle, would pinch the power tube, and you couldn't get the fscking gun to close up. I had to overtighten, file down, and repeat for half an hour to get the damned rivit looking nuts to stop touching the tube. Conclusion: Tippmann should beat the quality control guys for failing to check their products. How hard is it to attach a HPA line to the T-adapter at 800 PSI, and checking the flow rate after the volumizer? Or even better, beat the machinists too for failing to notice excess piping in the T-adapter. A great product, and it makes my flatline the most consistent gun on the field, every single time. They're very lucky that I think that no product is perfect, and if I don't have to do something TO the product, I'm sad. It costs to much for what it is. $70 would be great. Rating: 8 out of 10

oreomann33 Saturday, December 25th, 2004 | 8:11 pm PST i had the same problem the thing wouldnt close right all i had to do is twist the power tube around one more turn.

P8intballer13 Wednesday, February 2nd, 2005 | 6:59 pm PST where did u get a 38 ci?

cradle_of_filth Tuesday, November 1st, 2005 | 9:49 pm PST i had to bend the pipe a little to and just like with oreo i had to twist the powertube another turn but yeh i have a flatline with it too.best combination there is.even with my cheap pmi reg. oh yeh i didnt bother with that p.o.s bolt cover peice of crap.i already had a rocket cock so i just left the cover on and took the handle out.

LAMB_OF_GOD Friday, January 20th, 2006 | 2:55 pm PST haha i had LP kit,flatline,and pure energy reg on my gun haha.just barely put on system x reg today havent even tested it yet .put the pure energy on my brothers a-5.he has flatline but no LP but the a-5 flatline seems a little more accurate.