Period of
Product Use: |
| 2 years | 1 of 1 people found this review helpful.
|
|
 |
Paintball
Experience: |
More than 5 years |
|
Similar
Products Used: |
Cheap field masks |
|
| Marker Setup: |
Intimidator "Z"
Crossfire 70/4500 peanut nitro tank
RMR Intimidator Lockdown Cap
RMR Intimidator Ramrod
Halo B w/ Rip Drive hopper |
|
|
|
|
| Strengths: |
Very high resistance to fogging
Inexpensive
Durable
Excellent Customer Support |
|
| Weaknesses: |
Holding bolts for mask may work loose after months of play |
|
| Review: |
I have had my mask for almost 3 years and have had very good experieces with it. It has never fogged up on me. It has had some condensation build up under extreme humid conditions (like during a heavy rainstorm), but I was still able to see. I have had friends with other "thermal lens" masks that were fogging up on them all the time, and one of them actually had to call themselves out because of it.
The only slight problem I have had is the lower bolts working loose after almost 2 years of play. Since I lost the bolt, I called JT up and they are sending me some at no charge. They recommended that I use locktite to keep them from loosening up. They said they don't locktite them so that players can upgrade the mask bottoms if necessary. Their customer service is superb. |
|
| Conclusion: |
I would highly recommend this product. I have had no trouble with fogging at all. If you want to bring some fresh air into the mask, I'd suggest upgrading the mask with the fan that you can install into it. |
|
| Rating: |
| 10 out of 10 | Last edited on Friday, July 2nd, 2004 at 5:25 pm PST |
|
|
