E-class orracle
Nexus ram
alluminum pump rod
2 QEV
Speedy drop
Full SS Freak
Strengths:
Extreamly smooth Operation
Designed for the QEV's
Looks great on your
Weaknesses:
The QEV's dont always stop exactly whare you want them to be.
Review:
This is by far the best ram I have ever owned or tested. Combined with the Qev's and the Eclipse frame your gun can rip. Another key point of this ram is that it runs at a very low pressure. The ram is like a hot knife through butter. Another key is that you can rebuild the ram. This makes overall work on your ram much more easy. If you buy this ram you will not be dissapointed. Great ram.
Conclusion:
Buy this product right away. It works great lowers your pressure and increases your cycle speed drasticly
Tip- to make your gun go as fast as you can follow these settings in the timming menu
on your eclipse frame
Son-3
Cdel-3
Con-make this as low as you can and still have it cock. Lighter back block = lower Mine runs at 25
Cto-255
Coff-28
If it only takes 25ms for your ram to open the bolt and cock the hammer, you can set your COFF time to 22 or 23ms. When the ram is closing the bolt, it is no longer having to move the mass of the hammer or compress the hammer spring, so it can close faster than it can open.
If the 25ms CON time you have stated includes the time it takes for your loader to feed a ball in to the chamber (CON includes load time), then you can actually make COFF even shorter, as this does not need to include load time either. If this is the case, you could probably get COFF down to 15ms.
Give it a try - if you don't get any blow back, then 15ms is fine. If you do get some, just increase COFF 1ms at a time until the blow back disappears.
