Comments on spyder freek's Review

spyder freek Tuesday, July 20th, 2004 Period of Product Use: 6 months 1 of 1 people found this review helpful. Paintball Experience: 3 years Similar Products Used: Pmi inline (worse) Palmers (better with co2) Marker Setup: blue Spyder victor body Cp 1 piece barrel Ans feedneck black raised sight rail Supa Fly delren bolt Dark horizon Ti hammer Rocket Valve Assault block Torp reg set at 230psi 300fps steel hose Physco Drop forward Ipi 2.0 Esp frame dye gen 3 stickies check it sweetspot trigger 1mm pull 25g switch empire reloader pmi 72ci 3k Strengths: Sleek regulates fairly consistant low pressure Weaknesses: Terrible with co2 6fps diff at chrono max, usualy aroud 3 though Review: Good Reg does what it should, great for guns shooting at or below 400 after being worn in, at the crono it is fairly consistent....helps with accuracy allot. But the bad, i ran out of Hpa and my field doesn't fill it so i used a spare 9oz, now I HAD a bob long guage 300psi one, but with co2 on there for 500 shoots (not quick shots over an hour or so) it creeped up to what im guessing was 600psi.....ruining my guage, and compromising my rocket valve (not supposed go over 500psi). It was my fault i guess, but i know now to Throughly Lube this thing....i use white lithium grease its like 3 dollars for a HUGE TUB of it so i lube after 500 shots when running co2 to be safe, otherwise about 2000 or day of play with hpa. its very easy to strip down....i have a socket screwdriver in my tool kit just for it, i can strip and lube it in less than 5 minutes...easy for in between games when necessary Conclusion: I recommend Buying this....and lubeing it often. its great for the price, HAs fairly quick recharge, it keeps up at 13bps without to much shoot down. 9 because its good on hpa, but not on co2 but for the price its AWSOME! Rating: 9 out of 10

SpyderOWNAGE Saturday, October 2nd, 2004 | 3:16 pm PST wow...i'm using co2 on my torpedo and i'm running just a lil bit over 300 on average (about 310-320) good review :-)

spyder freek Monday, October 4th, 2004 | 3:05 pm PST as long as i lube it when im done shooting co2, i can run it fine. But, its annoying to take 3 min and do it every time.

Zeppo Sunday, January 16th, 2005 | 9:49 am PST I have a stock Dragun TES and a crossfire 47ci 3000psi nitro, will this reg work with my nitro?

spyder freek Monday, January 17th, 2005 | 1:21 pm PST should work great on nitro. May i recomend a cp reg tho....only 10 dollars more and alot more consistant! you may have problems going that low on your tes however. theses are lp regs (your gun is HP) you may need a new valve. The rocket valve is a great choice in conjunction with this or the cp reg. Do a search in the kingman forum on LP high efficency setups. You could to some high flowing mods to make it work well also. Catch me on aim if you have it and ill send you in the right direction.