* Very cool looking
* Easily strippable
* Very consistent ( even with c02)
I have yet to find any.
The BL Torp. reg is an awsome reg for anyone who would want a cheap reg that works great with c02/ n2. My first few shots wit this reg were: 284-287 and it wasnt broken in yet. It usually takes I figure about 3000 shots to fully break it in. The lightning milling on this reg. is very cool looking. It is recommended that you lube the o-ring inside the reg before you use it so you'll need to know how to take it apart. Pretty simple, there's a place in the middle of the reg where it can separate in two. Inside, you should find an o-ring on the piston, lube this o-ring with some Dow 33 and then put the reg back together. If you need to adjust this reg, turning the screw at the bottom clockwise will result in a higher velocity and turning it counter- clockwise will result in a lower velocity.
This reg. is very good. Its a nice, cheap and consistent reg. Other alternatives would be, Palmer Stab., CP reg, Sidewinder, etc..
10 out of 10
Last edited on Monday, September 6th, 2004 at 2:02 pm PST