Join  |  Log In - Paintball Reviews and Paintball Fields


Home     |      Paintball Articles     |      Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat / Comments on p8ntking08's Review / Comments on p8ntking08's Review / Comments on p8ntking08's Review / Comments on p8ntking08's Review / Comments on p8ntking08's Review

Comments on p8ntking08's Review

Jump to the Comments  |  Post a Comment  |  Dispute this Review  |  Return to the Reviews

p8ntking08 Monday, December 27th, 2004
Period of
Product Use:
Only tested
2 years
Products Used:
none much to the cam adjuster
Marker Setup: 2003 wgp vert feed
eclipse eblade
tickler reg
evo II
sto ram
dye ultralight
91 ci 4500 bulldog
Strengths: Great for upping your rof
easy to adjust
Weaknesses: Hard to install.
Review: I helped put this can adjuster into a friends gun and I got to tell ya every cocker with a hing must own this. This will up your rof significantly and almost make it impossible to chop. Although if you buy this you might as well get a new 3-way such as a shocktech bomb 3-way. My friend has the 3-way and it works real well with the cam adjuster.
Conclusion: I reccomend this adjuster to any cocker oner that has a hinge trigger. It will raise your rof and make it almsot impossible to chop.( with a aftermarket 3-way). The cam adjuster can be very agrivating to put into a gun. Altough once you get the hang of it installing can be easy. FIrst you must take off your hinge. Then use a punch and punch out your saftey. Be careful and watch for your spring and ball they will be there when u take out your saftey. Once the saftey is out look into were the saftey goes and youi will notice a whole on one of the sides that is were your spring should be adn the ball should sit right ontop of the spring. If u take out your saftey carefully the spring will stay were it is and most likely the ball will fall off the spring. Once you have your spring down in that whole enter your adjuster from the other side. Enter the end with the wierd dips in first. Take a real small punch and push the spring down into the whole were it is and the saftey whole will be completely open. Then push the adjuster in and right once the adjuster gets close to the spring push real hard and start to let off on the spring. If your adjuster was partly over the ball it should pop in and then you can push your cam adjuster in all the way. Most people complain that the cam adjuster comes out too easy and it spins and all that stuff. It isnt the cam adjuster it is the person putting it in. My friends cam adjsuter sits were it needs too and has not moved yet and it does not wiggle. Once your adjuster is in put your hinge frame back on your gun and screw your rod back into the 3-way. First make your adjustment all the way out so you still pull the trigger in all the way. Then adjust your 3-way until it cocks every time and shoots well. After this is done you can start adjusting your adjuster were you like it at. I give this product a 10 becuase it was cheap (my friend bought it off ebay for 10 dollars) and it works well. There is no cheaper way to upgrade your autococker than with the cam adjustment.
10 out of 10

Review Comments

No Comments

Post a Comment
Please log in to your account to post a comment.

Not a member yet? Sign up now for free!

Return to the Reviews

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use

Paintball Review

Copyright © 2000-2015 Hillclimb Media