2K3 E-force VTL with cp reg 12 oz Co2 and Empire Reloder
Could be accurate with correct paint to barrel match.cheap
I think that I got A slightly defected one
I moved up to this marker from a mech VTL. I wanted to put a e-force frame on it but I hated the powerfeed. Whene I first got it I oiled it, and charged the battery; Whene I got back from school I tried turning it on. Nothing happened. I didn't panic. I may have only one year of experience but I am very knowledgeable on the subject of paintball. The first thing that I did was remove the battery and put a screwdriver across the terminals. I put the battery back in and charged it again. This time it worked. after dry firing fow awhile, I took out the hammer bolt Assembly I saw a bit of wear, so I looked at the top of the upper tube and then I kinda freaked out because I saw that the anno was scratched off in 3 places. as mentioned before I oiled it so it couldn't have been that. Next I saw a small nick in front of the bolt. So i got steel wool and polished the top of the bolt and the top inside of the tube I was also having some recocking problems which this fixed I chose not to send it to PMI to get it replaced. I recently started going to a differen't field and I was happy to know that the paint was perfectly matched to my barrel which makes for some good accuracy. Not as good as electropneumatic markers but still good. I am recently having no problems. I am planning on buying an omen or a mag next year.
Currenly this is probably hard to find now but if you do find it, buy it.