Comments on bigboypaintball's Review

bigboypaintball Monday, February 28th, 2005 Period of Product Use: 3 months 8 of 10 people found this review helpful. Paintball Experience: More than 5 years Similar Products Used: almost all cocokers but the speed is the only thing different Marker Setup: well i have a few but i will talk about the trilogy competition it has a macroline system a wdp drop forward 18 inch dye ultralight which is wicked the most accurate barrel and a 68 4500 crossfire high pressure tank Recommended Upgrades: all the ones that i have put on it which is basically all you can do Strengths: Accurate as the 1500 dollar guns looks and the price of course Weaknesses: You can not make it electronic Review: This gun i kid you not is one of the best i have used and i have used many high classed guns like my tourney gun the proto matrix but this one can outshoot it on accuracy but not on speed of course but it will go as fast as you can move your finger and rarely short strokes this gun is two big thumbs up without a doubt once again wgp has come out with a great autococker that pretty much anyone can buy which is bad for our old timers like me because it gets harder and harder as we move on with cheaper and better guns forgot to mention it also looks pretty sweet to with the black to red fade Conclusion: This is an unbelievable deal go out and get one so you can keep up with the big boys Rating: 10 out of 10

Uziel Gal Monday, February 28th, 2005 | 4:01 pm PST TC Paintball have released a threaded bracket that will allow you to fit the E-Blade front solenoid, so that you can fit an E1 or E2 frame to a Trilogy marker. WGP are also apparently working on an E-frame specifically for the Trilogy markers.

Nicky Monday, May 9th, 2005 | 4:50 am PST Actually you can use an electric trigger. But its not one that all thre other autocockers can use.

^_^ Tuesday, December 12th, 2006 | 5:12 pm PST There are a lot more upgrades that you can do than what you have on yours lol

Uziel Gal Wednesday, December 13th, 2006 | 12:48 am PST This is quite an old review - there were weren't as many Trilogy specific upgrades around then as there are now.

vornsand187 Sunday, March 15th, 2009 | 8:34 pm PST so what can you upgrade to the autococker tri

Uziel Gal Monday, March 16th, 2009 | 12:47 am PST Later Trilogy markers have threaded feed necks, making it easy to change the feed neck. You can of course change the barrel, reg and ASA, which are all standard parts. The bolt can be changed for any 2000-2004 Autococker bolt. In the same way, ant 2000-2004 back block will fit. You can also use 1999 and earlier stock back blocks, but these will need a matching bolt, and in the case of the oldest back blocks, a longer cocking rod too. Frames can be changed for an Autococker frame, but the marker may then need a timing rod to adjust timing - TechT make one. TechT also make an adapter that allows an Autococker LPR to be fitted to the Trilogy. Palmer make an LPR specifically for the Trilogy, as well as a high flow valve. Some Autococker rams will fit the Trilogy without modification, as will hammer kits.