Period of
Product Use: |
| Less than a month | 2 of 2 people found this review helpful.
|
|
 |
Paintball
Experience: |
3 years |
|
Similar
Products Used: |
i used a guys 98 with a single piece adapter (gta) |
|
| Marker Setup: |
98 custom
flatline barrel
3 piece verical adapter
X-chamber
spee t cocker
lapco RVA
Richochet AK electronic hopper |
|
|
|
|
| Strengths: |
Lightness, ability to change parts from front grip |
|
| Weaknesses: |
There have been no weakenesses that were the parts fault (i put it in wrong) |
|
| Review: |
I take back what i had said before about how "horrible" this adapter was.....
I took apart my gun the other day to find a way to stop the leaking that was occuring everytime i gassed up my gun... and i had realised that i had not screwed the piece of the adapter into the valve all the way....
So the reason why it leaked on me was really my fault and not the parts fault..... i did not screw it in all the way like a moron....
It works great now that its installed properly... i wanted to clean some of the oily crud that was on the inside of my gun near the adapter... i was able to simply disconnect the arm and wipe it all out... then put the piece back together.. gassed up.. no leaks...
Good product... very very light.. and machined (in my opinion) a hell of a lot better than the single piece which is notorious for having lumpy welds and crappy designing as far as having some parts of the tubing sticking to far out to block air flow.....
I say if you can.. and you know how to install things right the first time... buy it....
|
|
| Conclusion: |
i change what i had originally said about it and state that it is a good product (you just need to install it correctly) ... the idea about the product is pretty cool (makes you able to change things much faster without having to take the adapter out of your valve..)
i recommend it to all.... just remember to INSTALL IT CORRECTLY!!! |
|
| Rating: |
| 10 out of 10 | Last edited on Saturday, May 7th, 2005 at 2:34 pm PST |
|
|
