|
|
Period of
Product Use: |
2 years |
|
Paintball
Experience: |
More than 5 years |
|
Similar
Products Used: |
none |
|
| Marker Setup: |
*98 Custom (RT, Double trigger, Center feed adapator, ice cold barrel and the All American, wicked bolt)
* E-Custom Pro (expansion chamber, Freak and All American barrels, rear cocking bolt, Center feed adaptor, Wicked bolt, Rufus Dawg Double trigger) good gun! |
|
|
|
|
| Strengths: |
Mainly cosmetic. Inexpensive. |
|
| Weaknesses: |
Maintains the "floating" problem. It can be fixed, read below. |
|
| Review: |
Put simply, Take your gun apart and insert the new safety lock.
I have used the same device for a couple of years now in 2 different guns. I sold my 98 custom for the E trigger Custom Pro. It looks great. I have a picture or two on PB review.
The fix. CLEAN the holes with soap and water to remove any oil or grease. Use a cotton swab (for cleaning your ears) and wipe the holes with isopropal alcohol. Allow is to dry about 10 minutes. Apply clear finger nail polish or tape off your gun and spray paint into the hole. Don't get to crazy with it, just enough to coat the hole. Allow about an Hour to dry. This application with cause friction in the holes to keep it from "floating". I only had to do one application! Take you time with it.
The safety will move smoothly only when you want to use it.
|
|
| Conclusion: |
If you like to be unique this is you answer. I originally bought mine to fix the "floating" problem. This product will not wear away (the color is not painted on) and fits perfectly.
I give it a 9, because of the floating problem is not fixed. |
|
| Rating: |
|
|
|
|
|
|
