 Prea |
|
Monday, October 10th, 2005 |
|
Period of
Product Use: |
| Less than a month | 1 of 1 people found this review helpful.
|
|
|
Paintball
Experience: |
2 years |
|
Similar
Products Used: |
none, all other guns were sear trippers |
|
| Marker Setup: |
Tippmann 98 Custom | Viewloader Vlocity Hopper | BSI E-Bolt w/ Planet Eclipse QEV | J & J Ceramic 14" Barrel | Promark Products BSI Stick Trigger | Dye Sticky 3 Grips | CP "No Drop" Rail w/ Check It Products On/Off ASA | PPS Male Stabalizer Regulator | Polished Internals | Double Ball Latch | 68/4500 HP Crossfire Tank |
|
|
|
|
| Strengths: |
See review
|
|
| Weaknesses: |
See review |
|
| Review: |
Strengths
turns a low end mech gun into a mid end electro
fast, and easy to walk
easy to adjust modes
30 bps cap in semi (even though the ram can only fully cycle around 14...or 16 with qev)
tournament lock
Weaknesses
chops unless you have a force feed hopper, and it sill chops around 6-7 balls out of a full reloader b, but a centerfeed would help solve this...(you cant use any other hopper besides a true force feed, i used an egg(semi-force feed)....and my gun became a blender at around 9bps)
wire sometimes come unsouldered, but nothing some goop and electrical tape cant fix :)
battery cover is a pain to put on
hard to close gun because the one wire that goes from the solenoid to the ram gets in the way...but i did some milling inside my gun to get this to fit better
if you play speedball with a tippmann this is a great upgrade, and makes your gun able to compete with guns such as the ion and wrath (and i believe u can get eyes onto your ebolt with the edwins ace kit)......this things is easy as hell to walk, i can easily get 10bps, consistently get 12.....and bursts of 14........the only bad thing is that it chops unless u have a force feed hopper, and it still occasionaly chops if you dont have a centerfeed......and remember that you have to break in the lpr (idk how many shots this takes to do though)
EDIT: well i wanna update some stuff.......i went to use it, and i couldnt get my velocity up more than 240 or so...and the spring in my ram keeps getting messed up...and the ram doesnt move far enough to fully push in the valve pin either....all this is really pissing me off....so soon im gonna get a 4way noid, and an air-returned ram |
|
| Conclusion: |
they do not make this anymore, but if you can find one used....GET IT!......i got mine for $160 and i am very pleased.........im going to give this an 6 since it has chopping problems if you dont have the right upgrades, and since installation is a bit of a pain....but you get used to it (i take my gun apart everyday though) .....and because of the problems ive had with it working correctly |
|
| Rating: |
| 6 out of 10 | Last edited on Saturday, December 3rd, 2005 at 7:51 am PST |
|
|
|
|
|
|
