I got this item about a month ago because I wanted to be able to use a bi pod with my flatline and attach accessories to the barrel. When i received it it was packaged nicely. It comes disassembled with the main body, four rails, and 16 screws.
I started by removing the end caps on the flatline. This was simple since their was only one screw on each cap. The cap at the front of the barrel came off easily but the one at the end was a little harder to remove. When i got them both off the barrel slid out attached to the back end cap. Next i put the barrel and back end cap on the body of the new shroud. I put the screws into both caps and reattached them. Them i put the four rails on. It was just a matter of finding the ones that go on the top and bottom because those have indents for the flatline's screws. Them i installed all the rails. Each used four screws.
Once it is on the gun you can notice the extra weight but it is off set by the tank. It works well and dose not get in the way. It is very easy to attach the accessories to the rail so no worries there.
If you want to use a bi pod or some other accessories with you flatline this is for you. I would recommend you get it.
10 out of 10
Last edited on Monday, May 8th, 2006 at 4:19 pm PST