Join  |  Log In - Paintball Reviews and Paintball Fields


Home     |      Paintball Articles     |      Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat / Comments on misfiter01's Review / Comments on misfiter01's Review / Comments on misfiter01's Review / Comments on misfiter01's Review / Comments on misfiter01's Review

Comments on misfiter01's Review

Jump to the Comments  |  Post a Comment  |  Dispute this Review  |  Return to the Reviews

misfiter01 Monday, January 1st, 2007
Period of
Product Use:
Less than a month4 of 4 people found this review helpful.

3 years
Products Used:
Tons, Way to many to list. But this Thing keeps up with just bout anything right out of the box
Marker Setup: Proto Matrix rail
Dye UL Barrel
Dm6 on/off
Cp Rail
Clamping Feedneck
UL Frame +++ Virtue soon to Come
cp rail
and on/off
Strengths: Speed
Low profile
no chops at all
Dye Performance
Weaknesses: Backcap
Plasticy look
Review: Well I recently baught this gun about lets say the start of winter break whcih was about 2 weeks ago. I was at my Local feild every single day over the break playing and practicing with my team. Well first off this gun blew away the competition because well the competition was mostly ions, but a few had virtues and it still wasnt anything to compare.

The Performance of this gun is amazing, the settings 30bps ramp right outta the box. Its amazing, the trigger pull pretty much sucks, without some work, for one you should take out the spring for your trigger thatll take away a lot of the stiffness to the trigger.

Accuracy..I WAS MOWING FACES!!! maaaaaaaaaan o maaan, the barrel provides GREAT stock performance.

Light/Low Profile.. IS GREAT not much bigger then the ion and sure beats the hell outta its performance but still this thing is pretty freakin light even with those ginormous metal tanks. I use a dye stubb and i love it.

LED Display/Eyes: The Led is really easy to use, push on, push 2nd button for eyes off.
But to change the modes, that can be a bit hard to get use to. Ive been reading these reviews on how there pmr keeps chopping well, ive put probly a good 7,000 pballs through mine and havnt had a break or jam.

Weakness: Guys who get there gun right outta the box and TRY to put it on PSP or Millenium mode, it wont work Due to the fact the gun hasnt been broken in the noid will seem like its bogging down. Break your gun in and then try it, itll work great.

Internals: Its wow. Very easy to clean very easy to figure out. There are a couple O-rings on some on the internals that make you wonder..why the hell..would you put that there.. but eh it works in the end i guess. HOWEVER during Breakin process i did blow quite a few o-rings.

Problems and uh-ohs.. Well out of the box, my back cap was completely messed up, it was alrdy cross threaded and wouldnt even screw in. And then next, youll probly get leaking from your hose, easy fix could be cut to long or to short, or you might need some Tefflon tape. It does take awhile to break your reg in, but as it breaks in youll notice an increase in your guns performance. Biggest problem i had was leakage!! Either blowing an o-ring or leakage from the macroline. BUT guys the best thing you can do is read your manual..i takes time but its really worth it, and get use to your gun.. And another thing if you turn your FPS below about 185 your guns will start leaking internally. AND!!! PLEASE turn down your velocity before you use your gun.. before you put air on it because you will might be in danger of blowing your reg.

I repeat again, dont try different settings right out of the box because the gun hasnt been broken in and it will most likely bog down on you. Dont think the gun is crap because of this, you simply havnt broken the gun in yet.

But really you cant go wrong with this gun, The ups that are coming out for this gun will make it shoot just like a dm6, dmc, shockers, eteks//other egos. its amazing, if you havnt herd the UL Frame is Already out, there is a Tadao board coming out along with a virtue board, and then there are color kits also to replace back cap,eye cover,feedneck etc.
Conclusion: This is a GREAT GUN!!! i did have some trouble but it wasnt really anything to complain about.. My friend baught a 05 shocker for like 700.00 *he got ripped hard**, This thing kept up. Im telling you with the upgrades that will be coming out, this gun will be able to pass the dm6 and pm7 and some egos performance.
10 out of 10Last edited on Saturday, January 6th, 2007 at 5:10 pm PST

Review Comments
tippo Monday, January 1st, 2007 | 4:06 pm PST
yeah, i had leak problems too, but when i took out the tank and rescrewed it in, it stopped. I wonder why? But it also started leaking when i chopped. Oh, and with the rear cap, you just have to push it in and it starts screwing in. Nice review.

misfiter01 Saturday, January 6th, 2007 | 5:01 pm PST
Yeah, same here with the leaky problems, its not so much a big deal. But yeah that backcap was messed up when i got mine, the threads were actually crossthreaded. but it wasnt a big deal i just got a new one. and i Suggest for everyone outthere go to pbwarehouse and get the Hybrid back cap bolt kit its worth the 45.00 bucks

Post a Comment
Please log in to your account to post a comment.

Not a member yet? Sign up now for free!

Return to the Reviews

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use

Paintball Review

Copyright © 2000-2015 Hillclimb Media