Boos blade on my evo and tested the stock trigger on the pmr (hated it)
Main gun PMR: -Stock bord
-Hyper 2 stock reg
-phat mini dropforward w/on-off
-14" CP 2 Piece
-Vlocity jr with Ganstar Chip
-68-3000 PMI HP Fiber tank, 68-4500 Crossfire LP
-New Designz ASA with guage port
-and the end all to end all upgrades the New Designz Blade trigger
Back up gun EVO:
-boss blade trigger
-phat mini dropforward w/on-off
-CP 14" barrel
-Extream rage vertical feed Neck
-Crossfire 68-3000 hp tank w/empire tank cover
-Egg 2 hopper with z-bord
Light, easy to set, Easy to install, smooth pull, more room for walking the trigger.
Is being to perfict a weakness??
I have used this thing 4 times now and every time I love it more and more. I have been playing at Killer paintball's indoor field in Mi every Friday for the last for weeks and I seem to be grabbing a lot of attention from the other PMR owners that still have the stock trigger.
Let a guy empty a hopper to see what he thought and got offered his old ego (not sure what year or if it even worked). I have my pull so extremely light I gotta hole the outer edge of my trigger guard at the start or when moving from bunker to bunker or ill set it off. The size of this trigger allows for a lot more finger room for walking. Setting the pre travel and post travel is simple and can be set a lot shorter then the stock trigger.
- Instillation of the trigger.
- First you need to remove the Body from the trigger frame and to do so you need to undo the screw in the back and the screw in-between the Vertical AsA and the trigger guard then remove the Vertical AsA .
- Next you need to LIGHTLY tap out the old pin for the trigger because your gonna be using the one the provided by NDZ.
- Next you need to remove the Trigger guard to do this there is a screw on the inner part of the frame where the Bord and battery is located then on in the top part of the frame not hard to find
- I would suggest disconnecting the eyes from the Bord because it will allow for a little more play when taking out the old trigger and installing the new one.
- Pull out the old trigger from the under side and slide in the NDZ blade from the underside and LIGHTLY tap in the new pin. The reason for using the new pin is for a smoother pull I tried the old pin and it just didn't feel right but I know some might like it so you can try both and see how it feels to you.
- Once installed follow the same steps in reverse order to put the frame back together and if you disconnected the eyes from the Bord MAKE SURE YOU PUT THEM BACK IN.
- Playing with your new trigger settings
- just like the old trigger you can set how short or how long the Pre and post travel will be, Left / Counter clock will move the travel screws out and Right / Clockwise will move them in just play with them till you hit the desired travel on both screws.
- I have mine set at the bare minimum of shortness if I turn the upper screw in a mm it wont fire is I set the lower screw out a mm it wont fire.
- I like it light and short just be-careful with a setting like this if you’re a front guy and you make a break for a bunker or you might shoot your self. I try to grab the outer part of the trigger guard when im running from bunker to bunker so I don't shoot my self or a team mate.
All-in all this is a great trigger for the PMR. Super smooth Easy to set and install easy to maintain (as triggers go) just one of the best all around upgrade's you can get for the PMR. I do suggest trying a lot of different settings for this trigger and find the one you like the best I doubt you Will be disappointed
(up date 4-16-07) OK so I have been using this Sense the 2nd Friday in February and the more I use it the more I love it. I have been playing with my trigger settings a little more and finely found my sweet spot. The roller system on this thing is phenomenal such a light pull and soooooooo smooth. I let one of the refs at my local field shoot a few hopers to get a feel for it at the crono and he just about died at how fast it was ( granted a lot of it is the marker ). the more I play with this the more I love it people that are thinking of buying the pmr buy this at the same time so you wont need to worry about buying a new trigger later.
OK this has got to be the endall to endall triggers for the PMR. It's The smoothest looking trigger i have seen for it. For the money and looks and easy of use there no excuse not to buy it.
10 out of 10
Last edited on Wednesday, March 10th, 2010 at 12:24 pm PST
Sorry if it seems more like an install guide i will be updateing this agin in another week or 2 once i get a better feel for it still playing with the setteings in the frame to see how they work with the trigger