Decreases operating pressure (lowers Dwell/HPR or LPR pressure)
Smells like Pears : )
Not really any...
I have used this lube in all types of guns (spools, poppit style, etc.) and this lube is the best for pretty much any application.
I'll copy and paste what it did to my ION from PbNation:
Hey ION owners,
Now, i know lurker from KOT, and thats how i found out about this lube. So, i was in need of lube, and i said, "Hell, why not give this stuff a chance?". Plus, it was only 8 BUCKS!!! ZOMG!! WHAT A DEALZ!? So i bought some, and here is my review of this lube:
I opened the package and i saw it came in a nice screw top jar. Very nice compared to other people selling their lube in camera film containers. I went into my room and sat down with my ion. I unscrewed the lid and saw it was almost clear. I unscrewed my end cap (stage 5 ftw!) and started to lube my bolt...i then saw how much better this stuff was then Dow 33. It was very thick. I only used very little to lube my bolt, end cap, firing can, inside of stage 5, SFT, and any other o-rings i could find (such as all the o-rings in my freak back). I didn't have air at the time, but i pushed my bolt forward, and it slid like butter.
At the feild:
I went to work, and i filled my tank. I then got a bag of paint and went outside. I poured some paint in the hopper and shot about 1 and 1/2 hopper i noticed it started to get hot (FPS wise mind you...). I went inside and grabbed the Hyper2 allen key and a phillips screwdriver. I sat down on the couch outside and begain to see what it can do. I 0'd out my dwell, and turned the reg all the way in (Dwell @ 24, reg at 3.5 turns out at 110 PSI). Now, before the Lurker lube, i was able to shoot my gun at 22 w/o drop off (i raised it 2 more, just incase ) So, i turned my dwell up to 12, the normal setting that QEV's are at. I then turned my reg out around 2.5-3 turns out. I shot a couple balls, and it still was hot (it was ~315-320). I then zero'd my dwell out again. This time i raised it to 4. It shot. W/ drop off that is. Now, i raised it to 5, and it had no drop off...i was like . i turned it up to 6 just to make sure there wasn't drop off later. My ION was running at 6 dwell...omfg. So, i went to the chrono, and it was ~290-292. My feild is 285 max. Turned my reg in to ~2 and it was at 285. It was a beautiful day.
After a day of play:
I went home, and sat on my bed, i opened up my ION (stage 5 ftw AGAIN!) just to see what the lube was doing. It was still on there! I was amazed. Normally, dow 33 turns into black stuff (shouldn't call it lube, cause...its not), but this stuff, was still on my bolt, everything. The tail, stem, shaft, and a little tiny bit on the head. I was sooo amazed.
I have tried this stuff out on matrixes, and it worked the same way. Lowered the LPR and HPR, and dwell a bit. This lube is FTW for ION'S!
TLDR; Lurker lube = secks.
Link to lurkers site- http://www.lurkerpaintball.com/
PS- Watch your lube if you get it. 1/2 of it is gone allready from people stealing it from me.
Thanks for reading and hope that you atleast break down and buy this 8 dollar 2 oz's of lube!
That was what it did for my ION. It was running at 6 dwell. Lurker lube has increased my consistancy to my ego about +/- 3.
I have NEVER gotten fsdo with this lube. The only way you could possibly get it, is from putting WAAAYYYY too much of this stuff on.
I really really enjoy this lube and hoping to buy some in bulk soon so it can sit in my workshop.
8 bucks...get it. Srsly, the best lube on the market today.