Join  |  Log In - Paintball Reviews and Paintball Fields


Home     |      Paintball Articles     |      Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat / Comments on NadeMagnet's Review / Comments on NadeMagnet's Review / Comments on NadeMagnet's Review / Comments on NadeMagnet's Review / Comments on NadeMagnet's Review

Comments on NadeMagnet's Review

Jump to the Comments  |  Post a Comment  |  Dispute this Review  |  Return to the Reviews

NadeMagnet Sunday, May 6th, 2007
Period of
Product Use:
Less than a month5 of 5 people found this review helpful.

3 years
Products Used:
Stock shell, Hybrid Suicide, First generation Powerlyte shell.
Marker Setup: PM6 blue to black with black jewels and blue eye covers
DM5 spring detents
UL frame blue grips
Critical raze blue
Virtue board
Tag sports visible eyes red
Hybrid bolt guide blue
Proto back 14" ul blue tip, UL back 684, 688 black
Boosted v35 halo b with rip drive, Critical drive cone, Shocktech spring, Vendetta trap door, 2 tone blue black 07 Powerlyte shell
XSV on/off asa with 0-1500 dye gauge
Crossfire 68/4500
Dye 07 rhino tank cover blue
Strengths: Awesome new design.
Seamless feedneck.
Easiest shell yet to disassemble.
Weaknesses: Redesigned lid and mouth.
Speedfeeds won't fit without mod.
Review: As you know if you read my suicide review the POS cracked in 3 places before I played with it on its first full day. The cracks on the top didn't go all the way through yet so I've been using the hybrid top on my first generation Powerlyte bottom. When the cracks deepened and the entire front screw housing broke away from the top I wanted to get another shell. I did have the full Powerlyte shell but they only came in all black and I really liked the blue top on black bottom. After checking out someones review on pbnation that had a bunch of really good pics showing all the different pieces I decided to give the 07 a shot. Before I ordered I contacted Powerlyte and asked them if it was possible to buy one with a 2 tone color cause all of their 2 tones were only with the camo colors and I don't care much for them. The response I got was that they'd be happy to, just buy a black shell and put in the comments that you want a blue top. That was cool cause if you think about it, now they're sitting on a black top with blue body and since their site doesn't offer custom color choices it'll be harder to sell that.
When it arrived I was surprised how easy it was to install everything. When I was looking at the pics I was only paying attention to the 3 main piece design, not how it was put together. It has the standard 3 top screws like all the other shells like these but only takes 2 screws in the bottom to get to the guts.
Everything is dropped in from the top. You almost have to try on purpose to pinch a wire with these.
There are no sharp edges inside like the hybrid and all nuts are fixed in place. No more worrying about loosing a nut anymore.
It was a bit tricky to get the board to fit in the board housing cause the bottom of the board would want to stick up a bit so I couldn't get it together at first. Once I figured out to angle the housing before pressing together it only takes a few seconds now.
Except for the battery door, and the board housing, the entire bottom is seamless. This greatly adds to the strength especially the feedneck. I can already tell it's much stronger then the first Powerlyte, Suicide, and stock shells. I'd bet anything it's stronger then the Warrior as well since it's just like the hybrid and first Powerlyte. Only bad thing about it being 1 piece is that the boost or any other battery that requires you to separate the shell to get it to fit, won't fit in these. At least it won't fit in the standard way of separating the shell. It may be able to be dropped in from above like the rest of the components but I can't test that until my boost gets back. (stopped charging after a whole 2 charges)
My Bone fits it fine though.

(Edit: Boost fits fine droped in from above)

My only complaint about this shell is the new lid and mouth. It comes with magnets to keep it closed but the bottom magnets have plastic around them and I already see stress marks from the top magnets hitting the plastic instead of the bottom magnets. I can tell that the plastic around the bottom magnets will eventually break off so I'm not sure how long they will last. It does have a small grove in part of the lip and small tongue on the lid so it will still stay closed even without the magnets.
Speedfeeds won't fit the new mouth without a mod. It's too tall and has no lip to snap them on with. I had to dremmel the speedfeed slightly to fit it around the magnets cause they are placed close to the lip. I can now get it to fit but it wont stay on without something like glue or a lot of double sided tape. Since I have a backup halo with a lid for rainy days, I'm going to use superglue gel to keep it on.

(Edit: The top cracked next to the side screws. My email was responded to in less then a full day. They are shipping me a new top for free. Best customer service I've had in pb.)
Conclusion: These are hands down the best shells made for halo/empires yet. When the suicide first came out it was a vast improvement over the stock design. (except for their strength) Now the 07 Powerlytes are a vast improvement over the hybrids and hybrid like shells. I'm going to recommend these to everyone that needs a new shell. Can only give a 9 though cause of the lid and mouth. They should of kept it the same as the first Powerlyte shells
9 out of 10Last edited on Wednesday, August 1st, 2007 at 12:25 am PST

Review Comments

No Comments

Post a Comment
Please log in to your account to post a comment.

Not a member yet? Sign up now for free!

Return to the Reviews

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use

Paintball Review

Copyright © 2000-2015 Hillclimb Media