|
|
Period of
Product Use: |
| Less than a month | 1 of 1 people found this review helpful.
|
|
|
Paintball
Experience: |
1 year |
|
Similar
Products Used: |
Stock spyder valve. |
|
| Marker Setup: |
Spyder Flash green/black splash, 14in SP All American splashed to match my gun, CMI R-2000 Reg, AKA Lighting Bolt |
|
|
|
|
| Strengths: |
Umm cheap. |
|
| Weaknesses: |
First off i bought this and it didn't come with a cup seal so i used this extra cupseal which came with my gun and it took me a while to drill it so it would actually fit on the valve pin. I put in my tank and there is a leak, i cock my gun which fixed the leak a little but it is still there. So i tried running low pressure i tried 500psi first, my gun spuddered then i try lower it kept burping so then i just put it back up to about 850psi and the damn gun still wont re-cock. After a while i said screw it and i put in my stock valve pin and cup seal. This fixed the leak, but my gun still will not recock at any pressure |
|
| Conclusion: |
I bought this valve to complete my low pressure setup and it didnt work. I dont know if i got a defective valve or what but im pretty piss*d off. So im just gonna put my stock valve in and order the AKA Tornado valve. If you have any ideas why this is happening please let me know. Email at BUTTGRAVY@cs.com or talk to me on my aol instant messenger GimpDogg69. |
|
| Rating: |
| 1 out of 10 | Last edited on Saturday, January 29th, 2005 at 5:17 am PST |
|
|
|
|
|
|
