|
|

Period of Product Use: |
3 months |
 |
Paintball Experience: |
2 years |
 |
Similar Products Used: |
Genesis, Spyder, Piranha, all same basic blow-back systems |
 |
| Marker Setup: |
M3 Patriot Sniper, Check-It Delrin Full Force Bolt, Taso Turbo Valve, Lapco Delux Cup-seal, Angel Bullet Ball Detent (needs a spacer to fit right), R.A.M. air chamber, Check-It High Tension Spring, Stainless Steel four ball push pin, CCM angel high-rise feed clamp, angel feed port adaptor, Chrome Spyder flame drop w/System-X X-10 on/off ASA, Black Magic Reg, Silver Check-It Sweet Spot Trigger (adjusted to the minimum, wil shoot if you flick the trigger frame!) HALO-B (a must if you want to shoot the 20bps it advertises), LAPCO Stainless, Xtreme 88ci 4.5k HP tank, steel braid line, Dye Rhino tank cover, sweat, and blood. |
 |
Recommended Upgrades: |
All new O-rings and refer to my set-up if you have the money, if not, then all you really need to run it on C02 at 20bps is a full force bolt, an ex-chamber, and a Halo-B. |
 |
 |
 |
 |
| Strengths: |
*adjustable ROF
*abundant firing modes
*LCD screen
*quality
*1.5 mil pull
*Cheap
*good looking
*easily upgradeable
*FUN (I find it fun to spell out my name on other players)
*reliable
*wicked snap-back function, no external moving parts that can get in your way (unless you manage to stick your pinky into a 1 cm hole)
|
 |
| Weaknesses: |
Bad? I found it difficult to change the bolt, all components are pretty much super-glued into the stock bolt. What I would recommend is to just cut the main screw in half, take off the snap-back, buy a new screw for 50 cents, take out the hammer peg, and put it all back together with the Full Force bolt. |
 |
| Conclusion: |
It screams " BUY ME!" It's the PMA (Poor Man's Angel) I give it a 10 for quality, looks, and angel-like capabilities. However, my rating for the milling quality is a 7, this is due to the fact you can see the little circles left from the milling tool. PMA!!! |
 |
| Rating: |
| 9 out of 10 | Last edited on Saturday, January 29th, 2005 at 1:16 am PST |
|
 |
|
|
|
|