not trying to be mean but when you said "it has so much blow back the balls could not feed" i relized you have no clue what you are talking about because un less there is a holw in the top of the bolt and the front is pluged up the air will not push the balls up so much to keep them from feeding at all if the marker is timed correctly
Eclipse Blade is a type of frame, It's not an Eclipse Eblade (Eclipse makes a standard hinge frame that retails for about 117$)
The blowback into the feedneck is caused by a poor seal, I understand what he's saying and it's far more evident with blowback markers (the balls "bounce" in the feedneck, so when the bolt comes forward a ball isn't in the breech (since it's bounced up). you would have to hold the trigger and wait for one to fall (about 2BPS) adjusting your timing may help, but not the cocking rod, you have to raise the hammer lug so it releases from the seer earlier (effectively a hair trigger) which gives more time before the ram starts to push the bolt back with respect to the valve discharge.
the jersey comment was a joke, saying the bolt would be as good an upgrade as nothing at all...
Last edited on Saturday, July 23rd, 2005 at 11:03 am PST