M3 Dragun LCD, M3 Barrel Kit, Richochet AK, CIP High Vol. Cell, CIP Adj.Dbl.Trigger, CIP Full Force Delrin Bolt, Java Tuctite Drop Fwd., Palmer Female Stabilizer, Benchmark 4stg X-chamber, 32* Spring Set, Turbo Valve & High Flow Vale Pin, 20oz Co2 w/ CMI Co2000 pin valve reg. Operating Pressure 500 psi.
The Co2000 is probobly the most unique regulator you'll ever find, a Co2 adjustable bottle reg. Operates similar to the R-2000 reg, with same internals allowing great Co2 handling characteristics. A must have for Co2 freaks.
When filling the bottle you may have to fiddle with the adjuster on the reg at first before it can be ready to be used. Start out with it on a very low setting, but do not back out the adjuster nut too far or it'll burst. Once its filled you will have to adjust it by tightening the adjuster nut, then you will see your guage begin to register operating pressure. Do not be fooled there is Co2 inside the reg, so do not under any circumstances unscrew the adjuster nut otherwise you may loose an eye or something.
Great co2 reg, though drop off in severe rapid fire is still slightly noticable. However during severe rapid fire the regulator did not freeze, I sustained a 20bps rate of fire with my dragun (unloaded) for 50 rounds during testing to see if it would make it, it did. I recomend this reg for co2 fans though. I'm about to purchase another Co2000 to use with a 3.5 oz. I have my bottle pressure set at 800 psi.