Comments on Silvering Clay's Review

Silvering Clay Thursday, May 8th, 2003 Period of Product Use: Less than a month 8 of 9 people found this review helpful. Paintball Experience: 2 years Similar Products Used: none, spray and pray, looking down the barrel Marker Setup: Spyder Compact 2k 2in1 Java Ed. w/: CMI 4 stage expansion chamber, CMI Thunder Pig 16" and 21" Rifled Barrels, BSA 30mm Red Dot Sight, PMI Gas Through Stock, 32° Venturi Bolt and Spring kit, ACI 3k PSI Remote, and 20 oz. CO2 Strengths: See Review. Weaknesses: See Review. Review: I have only used this with my 16" barrel, but the results were staggering none the less. I would not recomend this unless you have some sort of joy for taking people out from a distance. It took me about 5 minutes to get it calibrated, one turn of the elevation dial, after that I could hit something the size of a baseball or smaller onthe first shot up to about 50 feet, give or take. After that depending on how far you are away you can normally hit what you want on the second round fired. The first round will be maybe 2" off and all you have to do is ajust depending on drop and wind and dead on accurate again. Makes shooting through thick bushes very easy because you can just put the dot between 2 sticks and you will make it through every time (or maybe 2 shots later). Makes any gun more accurate garunteed. Get this Sight. http://www.sportsmansguide.com/ You can get this sight for a 3/8" dovetail mount for WAY below retail. Strengths: Not too heavy 11 different intensity settings Very Accurate Looks good Does not throw ballance of your gun off Very easy to calibrate Can be cheep if you go to the right place (see review) Weaknesses: Lense caps can be loose (can fix with a little tape on the inside of cap) nothing elce Conclusion: Get the 3/8" version and you will not regret it. Also dont bother if you have a vertical feed. (You would get a great view of your feed tube. Rating: 10 out of 10

Art Minnick Monday, June 9th, 2003 | 5:27 pm PST How did you mount this sight with it not being blocked by the hopper and elbow

Slimz Monday, November 8th, 2004 | 8:02 am PST How is that 21" barrel working out for you? Any noticable accuracy difference from the 16"

cshamrocks1190 Thursday, July 7th, 2005 | 2:42 pm PST i have a tippman 98c, and if i installed this scope would I get a clear view or would it be blocked by the elbow/hopper. I just have a regular hopper no fancy stuff

Big C Unit Friday, September 8th, 2006 | 11:55 pm PST I was faced by the same delema Art, I got a 3 inch jcs offset sight rail at special ops paintball. it took care of the problem of having a vertical feed. it shifts the rail about an inch and a half to the left or right (if your left handed). it only cost about 15 bucks. it really works great, I love this sight. Last edited on Friday, September 8th, 2006 at 11:57 pm PST