|
|
Period of
Product Use: |
| Less than a month | 5 of 6 people found this review helpful.
|
|
|
Paintball
Experience: |
6 months |
|
Similar
Products Used: |
none |
|
| Marker Setup: |
pmi sts 2k3 marker. 14 inch wisper barrel and check it powerstation reg. |
|
|
|
|
| Strengths: |
Very fast refresh rate/ |
|
| Weaknesses: |
None. |
|
| Review: |
I bought this upgrade to replace the gas though the foregrips on my sts 2k3 because i was running c02 and was spiking and having drop offs.The first think i notice this reg did was quite the gun down by reg the input pressure on the gun.I laso notice the c02 was now fully expanded when the gun was fired.There are only two fraw backs to this reg that i found. 1. the placments of the input line and gauge placments. The gauge input in placed near the top center of the reg, where some people like me would place there fingers as to use the reg as a front grip. The input line when the reg was reg was fully screwed in may cause some users to have there air line cutting across the trigger frame. When I used the reg at the field I was able withing 15 min with few turns of the set screw of the reg to set marker to 290 fps and it stayed there all day even as it hit 90 on the field. Im a back player and laying tdown few hopper of paint did not cause the reg to slow or the marker to burp. Only drawback with this reg and c02 it get very cold in high fire player. |
|
| Conclusion: |
For people looking for a good reg to replace there gas through grips i would recomend this product. |
|
| Rating: |
|
|
|
|
|
|
