PDA

View Full Version : BKO Tech Question.

Tim618
11-17-2002, 06:39 PM
Where can i get a good parts diagram of the bko..etc..mainly i need to see a diagram of the reg, but also internals too. help me out if you can.
gregicd
11-18-2002, 11:32 PM
Could I ask you why you need a diagram?
Tim618
11-19-2002, 06:40 AM
I need one because im putting in a new valve for one, and i believe i put my reg together wrong, but maybe not, and for future references, can you help me?

-Tim
Shadow_Warrior
11-19-2002, 08:27 AM
I do think it would be nice to have a parts diagram included with ICD markers... Say I take it apart for cleaning and don't remember how to get it back together right... what am I supposed to do? Every other company supplies you with part diagrams for this reason...
gregicd
11-19-2002, 04:56 PM
If you aren't smart enough to remember how it came apart you shouldn't be taking it apart in the first place. I'll see if I can get a diagram up on the reg. Plus you can ask me any questions you need on any of ICD's products.
Shadow_Warrior
11-19-2002, 05:30 PM
Yeah but sometimes when you are used to one marker and go to another, you can get confused. Say on one your valve has a black o-ring on the back and a white on the front and then on the other marker its the opposite... you get confused and then have leak problems. Thats why its nice to have a diagram and list of parts.
Tim618
11-19-2002, 05:31 PM
allright, thanks, but its not like im stupid, when i took it apart something fell out and i didn't know where it went, and i cant find out if i have it set right because im out of air and my local shop is out too, but ill get it filled soon hopefully. yah shadow warrior, like you said, a parts diagram would be nice on all there products, and your right, all the other markers ive owned have them. just a thought for you ICD peeps, ;) put in a diagram, or else make one available online.

-Tim
gregicd
11-19-2002, 07:25 PM
What part fell out? I can tell how to put it back together. I'll work on a online diagram for you all.
Tim618
11-20-2002, 04:10 AM
Thank you! The online diagrams would help people out a lot i think, as for the part that fell out, i unscrewed the reg, and like a little gold peice thats rounded fell out, and a spring, and like a little clear disk.
-Tim
gregicd
11-20-2002, 03:31 PM
That is your cup seal. Put the spring in first and then put the brass piece in.... the small end goes towards the spring. I hope this helps.
Tim618
11-21-2002, 07:36 AM
k, ill try that, what about the clear little disk thing though?
gregicd
11-21-2002, 09:54 PM
The piece that connects to your air source is were this cup seal goes. The part that screws into the asa is were you put the rest of the parts.
Tim618
11-22-2002, 03:35 AM
thank you, i will try that.
Tim618
11-23-2002, 11:48 AM
screw it im sending it to icd to be fixed, somin screwy with it and im not sure what it is, but it still leaks, and i dont want to make it worse than it allready is, so im sending it in monday, this will be second time ive sent it back in for repair..grrr...it all woulda helped to have a diagram of all the parts...cant wait till you get that out greg.
DeFiant
11-23-2002, 06:19 PM
Is it just in the bottom? The brass thingy goes into the spring that fits into the bottom piece where the fitting goes in. The white thing goes into the other half and they screw together.
Tim618
11-24-2002, 05:08 PM
thank you, i hope this is right, i was going to send it back tomorrow but i will try this ...if not ill send it back. thanks.
DeFiant
11-24-2002, 05:12 PM
Does your BKO have a serial number? Chances are if it doesn't than you have a defective reg like I did. One day I went out to play with my brand new gun, I shot it twice and than it wouldn't shoot again. Easily fixed, I put my Palmers Stabilizer on and it works great.
Tim618
11-25-2002, 06:37 AM
I dunno if i have a serial number, it probly doesnt because i got them about a month or 2 after they first came out, but if it did, where would it be located?
Tim618
11-25-2002, 07:43 AM
I finally got it fixed. I figured out the correct way for the reg to be put in and my valve was twisted. Thank you all for all your help, Greg: WOuld still like a parts diagram :blah:

thanks again,
Tim
gregicd
11-25-2002, 04:07 PM
I'll see about getting a diagram up for you all.
JTramoDude
11-25-2002, 04:17 PM
im juz gonna subscribe to this thread cause i want a diagram when someone gets one
Tim618
11-25-2002, 05:56 PM
I was out playing today, and my reg guage would say 225 when im shooting and when i would like move up or something and not shoot for about 40 seconds or so, my reg gauge would drop about 80 psi? Is that my reg?Do I need a knew one? or how can i fix this prob?Whats a good reg to get ? i was thinking of a stabalizer or mac dev, but would a mac dev fit? LMK.

-Tim
Tim618
11-26-2002, 07:23 AM
Can anyone help me out with the above question? I would appreciate your input.
=-Tim-=