krazy_Q
06-26-2001, 07:34 PM
Sup yall. See, I got a new gun (the spyder xtra) and with it I got tons of upgrades for it. I am having some problems with adding on the expansion chamber. Well, not exactly a problem but I dunno what to do. Here is exactly what I have and I'll tell you what I plan on doing, or tried and failed.
Spyder Xtra (with all of its stock parts like micro line hose, mini expansion chamber, etc...),
32 Degrees 6 stage expansion chamber,
Hose bent elbow(in case when I screw in the e.chamber the line hole isn't sraight ahead from the thing you screw in your tank into...),
a 5inch long stainless steel hose(i like the fact that it is steel but when I tried attaching it to the expansion chamber and the gun, found it hard to do. A Spyder stock micro line hose is made so that the line can rotate 360 degrees... ez to screw in),
... and i think that is it... if I need to get anything let me know.
So, this is what I did... I unscrewed the stock mini chber off the gun along with the hose,
I attached the steel hose to my hose elbow and screwed that onto the 6 stage chamber ( which didn't screw in all the way in for some reason).
Then I connected everything and tested it. As you know and as I predicted, it leaked in all the jointed places... Wut do I need to do? Buy Telfon tape or something? I was thinking of getting since all the parts don't screw in all the way.. But I don't like th fact that I'm going to have to use some TAPE for my all metal gun.... Is it better if I used a micro line? What do I do? I tried using my stock micro but that doesn't screw all the way into the expansion chaber either. Is my expansion chamber defective? or is this a common problem everyone deals with? If so, can someone please give me a 411 on what to do? I will appreciate it very much.
Damn, I f*ckin wrote a whole damn page...
Spyder Xtra (with all of its stock parts like micro line hose, mini expansion chamber, etc...),
32 Degrees 6 stage expansion chamber,
Hose bent elbow(in case when I screw in the e.chamber the line hole isn't sraight ahead from the thing you screw in your tank into...),
a 5inch long stainless steel hose(i like the fact that it is steel but when I tried attaching it to the expansion chamber and the gun, found it hard to do. A Spyder stock micro line hose is made so that the line can rotate 360 degrees... ez to screw in),
... and i think that is it... if I need to get anything let me know.
So, this is what I did... I unscrewed the stock mini chber off the gun along with the hose,
I attached the steel hose to my hose elbow and screwed that onto the 6 stage chamber ( which didn't screw in all the way in for some reason).
Then I connected everything and tested it. As you know and as I predicted, it leaked in all the jointed places... Wut do I need to do? Buy Telfon tape or something? I was thinking of getting since all the parts don't screw in all the way.. But I don't like th fact that I'm going to have to use some TAPE for my all metal gun.... Is it better if I used a micro line? What do I do? I tried using my stock micro but that doesn't screw all the way into the expansion chaber either. Is my expansion chamber defective? or is this a common problem everyone deals with? If so, can someone please give me a 411 on what to do? I will appreciate it very much.
Damn, I f*ckin wrote a whole damn page...