SHUTTER AND TL PLUS

[NICKYB]

After almost ordering a shutter, i have read and researched for days and decided to get a TL Plus. I have 210 more dollars, so i will then send it to sin customs and get that tight tigre anodize(-40) then i will throw away that *** piece of junk spyder calls and expansion and get a PMI regulator, chrome of course(-40). next comes antisiphon for my 20 0z. (-10)this means i have 110 dollars left.next i plan to get orange dye stickys(-20) to match my tigre paint job, and then i will have 100 dollars left, just enough for a dye boomstick!!!! i would appreciate all comments on this set up and plan, good or bad.

PS i later plant to go LP on the gun when i save up some more, new bolt, macroline, valve etc....

[SmartBall]

You will get much more performance out of your gun, and be much happier with it, if you go LP right away instead "tricking" it out!

[NICKYB]

ok smartball what parts do you recoomend to go LP with? include there prices please

thnx

[SmartBall]

You might wanna talk to some one whos gone LP already, like Dam fool, or TL+...

Heres what i would recomend though:

1. Get rid of ALL of you bottem line setup that you have now... like that peice-o-cr*p exp. chamber - Cost your own time!
2. PMI pure energy regulator, great for LP - $45
3. Macro line setup, macro is for LP setups - usually $20
4. SOme kinda turbo valve, important for a high flow rate in LP setups to have a larger valve - $25
5. Bigger LPC chamber, need a higher volume of air in LP setups - $20
6. High flow bolt, need as little air restriction when in LP, suggested ones are: shocktech delrin rear cocking, AKA/LMP lightning bolt, or get a force 3 cyclone bolt by bob long and take out the "spiral venturi" - any where from $30 to $60, depending on which you buy, the price orders form lowest to highest are this: bob long cylcone force 3, Shocktech Delrin, AKA/LMP Lightning bolt.
7. Nitro tank, only if you want to go SERIOUS LP! not for you though, as you will just be starting out on LP, and you probably won't have enough money left for a good N2 tank :(

Before you take my advice, get as many other setups as you can find! then compare them, see which ones seem the most logical, and study the Idea behind going LP with your spyder. the more info you know about it, the better!

[Richy_C]

like then you could almost get an impulse, 160 psi as opposed to 330psi avg

[A damn fool]

The cyclone bolt works good for lp, ur setup would be prety sweet, but id get the paint job after u buy all the eguipment. Since u plan on upgradin right away, buy a cheaper gun, like the compact, because then u dont waste all ur money on the crap u gotta get rid of on the gun. From there, buy evreything but the paint job, and ull have another 100 bucks, so then u go lp. If i were u id get the spyder compact, boomstick, bottemline, reg, lpchamber, turbo valve kit, drop forward, revo, bolt, spring kit, and then after that, go nitro. Then worry bout the paint job and grips. Just my 2 cents...

[Predator2]

If i were i you i would just take the venturi head out of the stock bolt. You will pretty much see the same performance with other bolts. Besides that follow whatever SmartBall says.

[A damn fool]

If u want to go even lower pressure, get the cyclone three, and take out the venturi head, it has a wider diameter then the stock bolt, and wil work just as well as the aka bolt.

[TLplus84]

the Shocktech Delrin bolt works great with Lp too. I have the shocktech bolt and the modified stock bolt, and the shocktech goes lower in psi htan the stock. I usually hit around 250 psi.