how can i setup my palmer stabilizer.

[MrENT]

i got a palmers stabilizer male reg, and i dont know how to set it up. i know the stabilizer is preset at 500 psi i want to set it at 300 psi, i have no way of testing it right now since the paintball feild is closed for 2 weeks, any help would be great.

[in trauma]

what gun do you have?

[PiranhaPro]

Originally posted by in trauma
what gun do you have?

Why would it matter what gun he has? he said he wanted it at 300 psi, the reg setting has nothing to with the gun. I personally am not familliar with the stab, i do know, they come with little "manuals" in the packaging, that should tell you how to adjust the pressure

[in trauma]

Originally posted by MrENT
i got a palmers stabilizer male reg, and i dont know how to set it up.



hmmm...
you have to set it up different for every gun!

[PetWoody]

ok, u need a gauge to get it to exactly 300 psi. when u get it stick it on the opistie side of where the gas goes in. There should be another asa hole for u to screw it in to. all u need to do is turn the screw on the bottom of the reg either clockwise or counter clockwise until u get it to 300. Its real easy.

[PiranhaPro]

Originally posted by in trauma
Originally posted by MrENT
i got a palmers stabilizer male reg, and i dont know how to set it up.



hmmm...
you have to set it up different for every gun!

You idiot, he said he wants it at 300psi, no matter what gun its on, set at 300 psi all you do it turn the little screw on the bottom, hence, it doesnt matter what gun it is on.

[Creek]

you do it just like woody says,if it a new stab then it will break in so you'll need to reset it again after a case or a case and a half of paintabout 2500 too 3000 shots