Need some help yo

[SpitfireXL]

Ok, this may sound dumb, but i dont care anyway... Im a noob at owning my own gun and i was wondering where i should lube my gun? ive got an f4 illistrator TP and the gun came with ACI gun lube. Do i lube the back cock? and probably the barrell, but please someone help on this on. Sorry if i sound so stupid but i live in the boonies where people are more related to grizzly bears than chimps (not me). THANKS!

[blake_sw]

I had the same questions too.
1. Take out your bolt, apply some oil to the o-rings and put a bit on your finger and rub it on the entire bolt.

2. Take your barrel off for this..take your co2/HPA tank off (make sure there's a little bit of air left). Put a small bit of oil on the tank o-ring. Put a few drops into the hole in the Duckbill (where the co2 screws in). Don't put too much. Once you've put some in that hole, screw your tank back on and dry fire the gun atleast 20 times to cylce the oil through the gun. Put a cloth over where the barrel goes so oil doesn't go allover the floor.

That's it! You can also take the entire thing apart and clean it all. I don't have the time for that, and what I just listed is good enough.

[SpitfireXL]

thanks sooooo much! Problem is thought i dont have any co2 left.. should i just wait till i get more>????

[blake_sw]

For now you can just oil the bolt. You should do both when you're done playing at the end of the day.

[DraXsuS]

or find a small hole that connects to the internels of your gun