noo i fugged my m3 LCD

[Dakkon]

well i was playing today, kinda bad morning, but it was good, i adjusted the reg and was getting good fps (Altough i noticed quite a curve with stock barrel with increase pressure, worked perfect with an armson stealth). and then i had it sitting in the staging area on a table, when bam, a rain storm hits, i go to play. and it only will shoot like every 3 seconds, no matter how much u hit the trigger. i tried auto and the counter goes up, and u hear a really quiet click (not the loud one) and then every once in a while it shoots. im gonna guess i fried my board with the water? can i get a new one somewhere, or does anyone have there old one for sale after buying a tourney board?

[Synchronium]

maybe. i used to have a basic and one time i got it wet and the indicator light and button were all screwd up. i would turn the gun off and the light would stay on. what i did was remove the battery,sear, solonoid, trigger sensor, and all the stuff out of the frame and cleaned it with kleenex and q-tips. then i let it sit for an hour and put it back together. anyways it worked and it is hard to fry a board. if you do what i mentioned it should work, and if it doesnt just tell me cuz you might need a new board. the lcd runs at high voltage so you might of temperlaraly screwd some of the wiring up.

[tonysk83]

well m3 boards are very big pieces of crap, i needed new ones tiwce in 1 month

[Synchronium]

the pi-e2 boards are a lot better

[Dakkon]

it turns on and everything, but now it has a new problem, i noticed there arnt any movements inside the gun when i pull the trigger at all now (i just took it apart to check. and then watched when i pulled, should those things be moving and clicking? well there not movign now.)

[Synchronium]

clean out the solonoid with a gun cloth

[Burb]

sometimes the solution can be a very simple and overlooked one. If you hear a quiet clicking, then that could mean the solenoid doesnt have enough juice to release the sear quiclky and everytime you pull the trigger. Try changing the battery.


peace;)


Burb

[Dakkon]

yea but a first it just clicked every now and then, while it had a constant quiet one, now it dosnt move at all, no clicks at all, but the counter goes up. ill try a new battery.