Marauder Mods

[barbarian-paint]

Uh could any of ya tell me what a good Xchamber to put on a marauder is. Or just any mods for a marauder would be nice.

[Housemaster]

May I direct you here: http://www.angelfire.com/tx5/ckbrewery/mob.html
The Marauder Owners Brotherhood.
A good X-Chamber would be an X-Core, available at www.countypaintball.com (do a search for "X-Core")

[barbarian-paint]

Thanx any1 else got any good mods?:)

[jawpaul]

To install an expansion you need to have a vertical adapter just remember that.

[DeeEight]

Originally posted by jawpaul
To install an expansion you need to have a vertical adapter just remember that.

not neccessarily, a CMI mini-inline regulator can thread into the ASA port and then your tank threads into it.

[sayton]

I have successfully made a full auto Marauder. It sucks alot of gas but by working on you valve you can lower this problem. If you shim the sear pin froward so that the trigger pin will bring the front up while the trigger is pulled, you have full-auto marker. I suggest also doing a trigger job first. trigger job are easy just eliminate the slack be drill & tapping to hole front and back of trigger, put in a hex screw the size you tap the hole and adjust the slack until gone. The Marauder I have done this to has a trigger pull of only about 1cm at the bottom, this is better then any Spyder that I have done trigger jobs to. when done right one quick trigger pull will let out about 3-4 rounds. I would also buy a better barrel, even a stock 12in spyder barrel. these guns are fun to mess around with. I will try to post a pic after this weekend for you