PDA

View Full Version : Blade Trigger Q

nordic
01-22-2003, 03:34 PM
Ok My friend just got a new impulse off e-paintballoutlet with some upgrades. He seems to be having a problem with the blade trigger. It will only shoot when you push the trigger to the left and then pull back. Otherwise it does nothing and its just like pulling the trigger and nothing happens. Another thing... I don't know a lot about impulses so bear with me here. Where the 2 C-Clip's attach to the nut type things if you push those both all the way in or all the way out it fires just fine but you have to hold them either in or out manually the second you let go the trigger goes back to normal and you have to push the trigger all the way to the left then pull back to shoot. Please help we are lost!
nordic
01-22-2003, 05:54 PM
^
Alpha1
01-22-2003, 06:05 PM
don't make the pull so short. lengthen it to be more reliable.
nordic
01-22-2003, 06:29 PM
its a pretty long pull.. but thats not the problem I think the problem is the two c-clips arent tight enough because when you push them in the problem doesnt happen!
PB_Gunner
01-22-2003, 06:47 PM
I had that same problem! I just took the grip frame off and took out the board and messed around with it for a while. when i put the board back on it worked fine. make sure nothing is loose, i think thats what the problem was.
thebluenu
01-23-2003, 02:38 AM
Originally posted by nordic
its a pretty long pull.. but thats not the problem I think the problem is the two c-clips arent tight enough because when you push them in the problem doesnt happen!

take it apart, grpi frame and all, and reassemble, redoing things might fix it......

FIRST, i would relax the trigger stops....
ShockerGEEk
01-23-2003, 03:34 PM
Buy an I-frame. This will solve all your problems.
sezter2
01-23-2003, 05:40 PM
or get an OTB frame they are gonna rock the **** off of anything ( unless you like I frames then go with that, its all personal preference)
nordic
01-25-2003, 06:26 AM
Ok the problem still has not been fixed because well what can I say my friend is extremely lazy he said he called e-outlet where he bought it from and they said just loosen the vert screw and trigger stop but he has no 1.5mm allen wrench lol Oh well thanks for the help!