100 bucks

[commandman10]

Hey I have 100 bucks what should I upgrade on my gun?I was thinking an x board and a 47ci 3000psi crosfire.Any suggestions good.thanks

[X_Brolly_X]

Antichop bolt, and the 47ci 3000psi crosfire.

[Crash Danger]

Originally posted by X_Brolly_X
Antichop bolt, and the 47ci 3000psi crosfire.

Anti-chop bolt? They make those for Draguns? What's the link?

[wulf1010]

hmmmm, i would say if you can save up for an evo2 they are absolutly awsome (if you dont mind the way the look).......the nitro tank is a good investment

[opus16_16]

Get a nitrogen tank. Even if you change guns you can allways use a nitrogen tank. It is a good investment!

[X_Brolly_X]

Go here;
http://www.geocities.com/brmachineco/

[commandman10]

I dont want to get an all day air pass though.I use about 500 to 600 shots a day.When i get a job i might use like 800 a day.I really dont want to get all day air.I would rather fill my tank once and be done with it.actually when i get a job paying the extra 4 for all day air might not be bad.Any opinoins good.Is the x board worth it i chop wheni fire really fast i chop sometimes.Or should i save and get an evo2 instead.

[Namniar20]

I think you should just save for an evo 2. of course they look funny but they are very fast. I have an evo 2 and I love mine never chopped yet. Had about a case through it too

[samis13]

I would say get the Halo, and the tank. Although if you chop often get the bolt and the tank. Then you won't have to worry about chopping but you'll be more consistant. I would wait until Jam Products comes out with their anti-chop bolt. Right now they only make autococker bolts.

[kaibutsu]

Remove the venturi from your bolt and polish it. Polish the striker. Polish the valve and pin. Use the $100 to buy the HPA tank and a 12v with xboard. Oddyssey just released the non-force fed sound activated Halo TSA so you might want to check that out. It is supposed to support 12-13bps.

[coyotekat3]

Definatly gettin a nitro tank is worth the money. A new bolt is also wise...if you dont want to modify your stock bolt...polish, remove venturi as kaibutsu stated....


Good Luck
Happy Huntin

[ZeroSkillet]

Is this anti-chop bolt any better than the Spunnk'l Bolt?
How exactly is it Anti-chop"? PLease explain to me....biggest moron in world!

Did I say that outloud?:eyes:

[samis13]

the anti chop bolt works like this, the piece of metal that is attached to the hammer/striker is in the stock bolt fixed, where it can't move. This is how it works if you were to chop, the striker would move forward along with the bolt but if there was a paintball in the way, the striker would be allowed to keep moving forward because there is a slit in the bolt with a spring. Look at the picture of the autococker one made by Jam products (http://www.apbbolts.com)

[wulf1010]

last i heard the antichop bolts wernt working all that well, but then i realy dont know much about them.....