help!!!!!!!

[MVpBaller]

i finally got my anti-siphon and when i tested it out it would fire fine untill i fired fast then the input preasure would drop and the paintball wouldn't make it out the barrel. it was also 10* F and i was using co2. I have vert reg and lpr.

[Ken448]

Sounds to me like your Max Flo needs to be cleaned /Lubed, or the antisiphon is kinked or pinched against the wall of the tank. Id try the Max flo first!

[Prophecy2112]

the co2 could still be liquid when it hits your maxflo, and even your solenoid at 10 degrees. Thats really bad.

[DasuperTech]

Check your filter in the side of the gun. Take out the grub plug there on the back of the marker you will probably have to take out the front one also you will also have to take out the grub screw on the side(this one is at and angle) you now can spin the filter and this sometimes works or take it our and turn it around.
It could be your reg but i doubt it. How old is the gun has it been ran on Co2 for very long????

I bought a spare imp because the kid couldn't get it to stop doing this exact same thing it

Good luck

[MVpBaller]

the gun is brand new. it has had co2 once before this time.

when i tried my friends nitro tank it worked well- the preasure climbed tho.

[thebluenu]

Originally posted by MVpBaller
i finally got my anti-siphon and when i tested it out it would fire fine untill i fired fast then the input preasure would drop and the paintball wouldn't make it out the barrel. it was also 10* F and i was using co2. I have vert reg and lpr.

was the tank sqrewed in all the way?> anyways, 10*, co2, i dunno, your hitting the point of the pressure being "iffy"