Strutten them Low end guns

[Evilcrayonusa]

If you have a nicely modded low end gun Lets see it. Heres a pic of my modded m83 Aka Point zero. its sportin a custom ported and polished barrel Smoothed internals ploished stryker and stryker chamber. Custome tryger job Chopped site rail with added imp site Smooth externals and Custome rifle but.http://www.pbreview.com/fpics/Evilcrayonusa070901195841billsgun001.JPG

http://www.pbreview.com/fpics/Evilcrayonusa070901200048billsgun002.JPG

[toadman7b22]

lol thats pretty cool!
i used to have a stingray and i upgraded it alot
i painted it
i polished the internals
i did a nice trigger job
i tried to do a air assist mod...

[Evilcrayonusa]

Heh Been visiting sting have we lol those guys are great http://www.stinggroup.com.addr

[sniper1rfa]

of my old gun (see "little kids and paintball" for uses). it is wickedly modded. it is, well, was a raptor. i have twin cocker ball detents, home made delrin high flow bolt, home made rear cocking, spyder maddman springs, diamond labs LP valve, gutted 4 stage sub zero, double trigger with chopped (looks normal now) gaurd, f-4 LPC, polished internals (except for the bolt, duh), modded hammer (it catches farther to trhe back so i can get better efficiancy) and some other minor stuff that i cant pull off the top of my head.

[blake_sw]

How old are you Crayon? That gun is uglier than my brother. Here's my "semi-low end" gun. Works like a dream now that PD Paintball moded it.
http://www.pbreview.com/fpics/blake_sw071001154506mymill2.jpg

[Evilcrayonusa]

the world needs More custome made bolts speeking of witch how hard was it to make that bolt ?

[Evilcrayonusa]

Im 20. And is it me or is that a Spyder with a bob long frame, Lp Cell,and gas throught grip. I have a Tricked spyder also With many of the same mods thought i decided to stay with the stock compact 2k body because i like the power feed and tubular designe. But thats personal preference. Nice gun though. but i was more lookin for LOW end markers

[KOTOWA]

For a low end gun, shove paintballs up your *** and fart.

[sniper1rfa]

an entire....... 1/2 hour. i drilled 3 holes in it (on the lathe so they were centered), two in the bolt and 1 on the bolt plug. then lightened it. then i screwed a cocker cocking rod (kapp twisted) into the back of the bolt.

[Evilcrayonusa]

did you buy a raptor bolt and mod it Or did you make it out of a solid block

[sniper1rfa]

i did not use solid block. you can by bar (smallparts.com) that is the right diameter, you just have to cut and drill it. BTW, they dont make raptor delrin bolts, and there is only one (that i know of) after market bolt.

[Evilcrayonusa]

I got some after market raptor bolts @ iisports.com I thought they had a delrin one But i may be wrong

[sniper1rfa]

but no delrin. and the stock bolt is better than a venturi anyway.

[flyingdeadbody1]

black what gun do you have? is that your only gun? i thought you played in tourneys? or you play with that gun ???

[Evilcrayonusa]

Stock first gen raptors had crap stock bolts but other than that ide agree theres no real point in the ventury. but ii used to have more bolts one of witch was this all aluminum star fire bolt which had nice air flow and was much lighter. Oh i checked out small parts.com they have some nifty stuff Coulednt find small cams though.

[sniper1rfa]

the raptor and a cocker. i use the cocker mainly but i use the raptor for fun sometimes. i think i am going to try to make it electric. and i have played tourneys with the raptor (before the cocker era)

[tj]

dude i wana go trick out my dads old pmi 1 its OLD lol it would be sweet to trick it out wit like cocker parts and stuff

[sniper1rfa]

u had to modify most of the parts a little to make them fit. i did it at our high schools shop. i almost screwed up the gun many a time.

[tj]

umm why would i care lol the gun ant even worth as much as the cocker parts lol

[sniper1rfa]

umm... just because. no, i like that gun, soon to cease being a raptor and start being "my gun." thinking of getting some solenoids and making an electro with the body and some of the parts.

[Evilcrayonusa]

I need a small cam that fits my Cd motermoter Then i can have a full auto M83. Heh i built the set up but my original cam was a lil too big. other than that it works nicly. Viva los Crap guns.

Need solinoids to make a recipricating motor?

[sniper1rfa]

you just lock the sear so it cant move back and forth so it is permanantly angadged with the trigger, it would be much easier, you could do it in like 2 seconds. although your idea would be more controlable, who needs control anyway :-)

[paintballer56]

thats kool dude i toatally agree with you

[Evilcrayonusa]

If i locked the seer it would chop balls like mad. Cool concept but trust me it works better on paper. With the cam engine method all i need is a small engine, a tiney cam, an instantanious push button switch, a pot resistor, and a power source ie a 9 volt. heh that will work nicly and i have all the parts but the cam. Well i do have an engine from an eletric razor that im tryin to work into the equasion but easier said than done (it has an od shaped cam attached to it ide have to drill a large hole for it which im not really cool with.

[sniper1rfa]

... solution, get a warp-feed

[jfoust]

do u guys take pleasure in makin me feel stupid?

[sniper1rfa]

but wiat, what'd i do?

[Evilcrayonusa]

Cause im not willing to spend too much on a 20 dollar gun but i can build a revvy hopper. For like 20 tops
heh this is gonna be sweet

[U/\/a/\/\eD]

Well that just gave sniper another 100 posts:D

[paintballer56]

wow, why would u waste time to upgrade a crappy gun

[Evilcrayonusa]

Originally posted by paintballer56
wow, why would u waste time to upgrade a crappy gun

You know thats a good question. I Tryk my crap gun because A. it gives me sumpin to do @ 4 am
B. It gives a a feeling of accomplishment
C. You know that the chance of running into some one who can boast that they Have the same set up are like nil
D. knowing that every body on the field is checking out your gun.
E. And of course lighing up Mags and cockers with a 20 dollar wonder gun Just for bragin rights