Twister feed

[Paintball9908]

I want to get the twister feed but my feed I have now which came with the gun is said to be J B welded on. Anyone know how to get it off?

[ShockerGEEk]

It shouldnt be LB welded on, it probably just has been locktited on. If your not gonna use the old feed tube later on you can take a rag and pair of vise grips to get it off. The rag is just so you dont scratch the old feed tube. When I did mine i scratched it all to pieces, but i wasnt going to reuse it so it was no biggie to me. You can also use a torch to heat the old feed tube to melt the locktite. If you have Vision you may want to remove the eye from the gun so you dont get to much heat to it.

[Tony Danza]

how do the different feed ports help...what does low-rise/high rise help your marker and is the stock feed good on the imp?:eyes:

[ShockerGEEk]

The low rise makes your gun top to bottom shorter ie. less of a target to hit. It also makes its feed faster, less distance for the ball to travel in a low rise feed tube compared to the stock feed tube. The stock feed tube is fine ont the Imp. its more of a personal preferance. I dont like the looks of the stock feed tube so thats why I changed.

[||GS|| Leb]

The low rise makes your gun top to bottom shorter ie. less of a target to hit. It also makes its feed faster, less distance for the ball to travel in a low rise feed tube compared to the stock feed tube. The stock feed tube is fine ont the Imp. its more of a personal preferance. I dont like the looks of the stock feed tube so thats why I changed.

Not true. The low rise only makes the balls feed faster when you have a force fed loader such as the evolution 2 or the halo's. Other wise a high rise is preferred because there are more balls in the stack. And if your talkin about the twister low rise, you really dont lose that much height.

[ShockerGEEk]

Well I have a Halo, guess i should have made that point.

[||GS|| Leb]

oh well :P