Expansion chamber????

[PaintKiller]

What is a good expansion chamber for my spyder shutter????
I dont want the x chamber i read that if liquid gas get through it can get dammaged or break.

[A damn fool]

thats stupid to put an ex chamber on a shutter, plus u cant. I tried before i realised an ex chamber wont do ne thing. U cant get a line to hook up to it because of all the metric to standrad addaptors ull need, unless u run the hose 6 inches to the side of the gun, or in front. Buy a new reg and an anti siphon tube, itll work just as good as an ex chamber, no liguid will get in ur gun, Or run remote, that does the same thing. The ex chambe will jsut scrw u the regulated air coming form ur stok reg, so its pointless.

[PaintKiller]

Yeah but i want a new expansion chamber do you know of any good ones i am doing a search for it now and there is not much?????

[Predator2]

a really good x chamber would cost about as much as this setup i am telling will perform better:

Antisiphon tank- 10.00 at 888paintball.com. This does the same thing as an x chamber.

PMI regulator- 40.00 at paintball gear. net.

The antisiphon will perform as well as the x chamber.

[PaintKiller]

What is wrong with the rugulator thats on the gun?>?????

[Predator2]

It works but it doesn't work. It works when there is no x chamber on it. You see, when the reg comes befor the x chamber, the x chamber messes up the regulated air that came out of the reg. When you two regulators it works even better and the atisiphon works as well as the x chamber. y kingman made it, i have no idea!

[PaintKiller]

I can just un screw the regulator!!!!!!!
Dont i need a new bottom line setup??
And diddent you say the x chamber dont work with the shutter.
Also like i said if it gets liquid in it it can get damaged or even break!

[Predator2]

thats wut the freakin anti siphon is for! keeping the liquid CO2 out of your gun so it won't break. No you don't need a new setup to add a new reg. keep the bottom line for the drop forward! YES its true the x chamber doesn't work but the anti siphon tank will work and do the job you want!

[A damn fool]

u cant add a bottemline to the kingman drop forward, its all messed up, so i just took it of, and added a bottemline. If u really want an ex chamber (which i wouldnt recoomned) get an aci 6 stage. But if u do that, ur loosing the entire point of the reg. Liguid co2 in your gunb wont perform, thats all, t wont really hurt a spyder. If u really want an ex chamber though, ur gunna need to buy a regular bottemline ne ways, becasue the stock reg cant be hooked up to the ex chamber, the distance os too short because of the adaptors ull need. It would cost about the same for the anti siphon, reg, and a botmeline then for an ex, new botemline, adaptors, and the reg setup wil work better. If u really want an ex chamber, fine, but ur gonna regret it in the future when u want to run lp and wasted the money on the ex chamber,

[PaintKiller]

Why do some drop fowards have regulators on it.???

[Predator2]

only the kingman regs. are on the drop forwards.

[Predator2]

y they made it that way, i have no idea.

[PaintKiller]

i am gonna wait and get the J&J cerimac barrel and wait for the outha stuff

[A damn fool]

wait a second, u dont have a barrel yet? Thsatsh the first upgrade u should get, then a revo, then do all that ohter stuff. U should have ased about that before u talked about the ex chamber, what is the most importnat upgrade for the shutter. U should only put the parts to ur gun u have in ur signiture, that way people can tell u what to get.

[A damn fool]

and also, the drop forward isnt made with the reg on it, the reg screws onto it. The drop was made just for that reg, and if u get rid of it, its useless, becasue the screw hole areside to side, and no other bottmeline adaptor will work on it. Thats why i out a doiffeent dr fowrad, the stock on is useless.

[A damn fool]

one more thing, u run remote, that does the same thing as an ex chamber, so u wont ever have to wry bout liquid in your gun (sorry i didnt pu the last 3 in one reply, i keep seeing new things everytime after i reply)

[PaintKiller]

OH yes i do have the remote i should use it....
I only used it 2 times.
But the paintkept breaking...
oh dont laugh how do i lower the psi on my gun.
i never really got to use it.
Isint it the knob where the i cock back.
My pants keep slipping off i got to do some thing about..
or the holder woulder would slide it would hurt to where but i love paintball so i dont care if it hurt's.

[PaintKiller]

hey i want to get the 32 Degrees 6 Stage Expansion Chamber
and can i just add it on or do i need something else????

[DamnRock]

What the hell are you talking about? I swear, sometimes people let their grammar slip when typing instead of talking. I KNOW you don't talk like that in person (or at least, I hope you don't.)

Anyways, I have a couple questions partially related to this...everyone talks about getting the anti-syphon tank with regulator (PMI for ~$40). I saw a picture of the PMI regulator, and it looked like it goes where the expansion chamber would go, so is that right? Also, I saw no actual gauge in the picture. Does it come with one or will I have to get one extra?

Also, if anyone has an opinion on 12v vs 9v revolutions? Any reason why the 9v wouldn't do the job? I found the 9v remanufactured for $29.95 at Paintballgear.net. That sounds like a good deal, but if I would regret it and want a 12v later, I'd like to know.

Thanks alot.

[DamnRock]

Sorry about the previous rant, took me a few times to read what Paintkiller was trying to say, a few words missing here and there make things hard to understand.

[PaintKiller]

Here is a pic!!!!
http://www.pbreview.com/fpics/PaintKiller021201221049expansion chamber.jpg

[DamnRock]

so, that's the regulator, what about a gauge? I thought the gauge/regulator went hand-in-hand...

That regulator goes where the foregrip goes? (i.e., where the expansion chamber goes?)

[PaintKiller]

????
its 6 gauge
on the web site
it also says it filters i mean takes the liquid gas and puts it back in the right fourm.

[A damn fool]

Thats ht eexpanison chamber. The reg does screw into the vertical adaptor. No gugae can be put onto it, ull need it tapped into ur asa adpator. Itll cost like 30 for the gauge, and labor, but thats with drilling oit out too. Do the reg and antio siphon, it wors great in the cold, i had no problem with it.

[Predator2]

im telling you man its not worth the money to get the x chamber. Youll want to get a reg. and antisiphon about a week after you get the x chamber, i gaurantee it. So just go for PMI Pure Energy Reg. and the Anti siphon

[PaintKiller]

ITS NOT AN X CHAMBER!!!!!!!