PDA

View Full Version : evo2 owners

commandman10
02-26-2003, 11:10 AM
Hi people with evolition 2s.I was wondering If you ever chop?I have a basic and I think its capped at 10 BPS.Or should i stick with my 12v thats the older good kind.Any opinions would be great thanks
BOB_IS_COOL
02-26-2003, 11:35 AM
buy and x-board and put in in you hopper. it will increase the speed it can work at.
Hobbs32
02-26-2003, 01:27 PM
I have one and I havn't choped scince I got it, its force fed, so unless you can shoot more than 17 bps you won'thave a probem.
Calebd2
02-26-2003, 04:29 PM
You m3 people are the worst at putting threads in the right forum!

If you shoot more than 12bps you will need to get an eggy, simple as that
samis13
02-26-2003, 04:33 PM
actually evos arent force feed, just for the record
BlackdLCD
02-26-2003, 04:53 PM
what kind of feed are they
commandman10
02-26-2003, 05:39 PM
Is the basic capped at 10bps?If so ill just buy an x board
samis13
02-26-2003, 05:47 PM
they spin the balls right into the feedneck, but its not forcing them into the breech like the halo. The evo 2 doesnt have constant pressure, it doenst have pressure at all. It also senses a gap in the paintballs so its still not gonna feed that fast. Like the halo senses movement and then turns on.
Hobbs32
02-27-2003, 12:21 PM
Why did Brass Egale sue Odyssy then if they weren't the same, or almost they same?
BOB_IS_COOL
02-27-2003, 01:42 PM
They sued them because the halo used the same thing for detecting a ball as the revy. it was patented so they sued.
alexwoehrer
02-27-2003, 04:21 PM
I have an Eggo II, and I say it's force feed... it forces the balls into the neck... the Revvy on the other hand, is not consistent in feeding 12 or even 10 bps, it just stirs up the balls, doesn't push them down the neck at all... and the Eggo II does feed close 17bps but not quite... with two rechargeable batteries, I timed it and it pushed all of the balls I could fit into the hopper, in 11 sec., but considering it holds only 180 I heard, it wasn't as fast as I thought... I might eventually get a HALO B, but I got the Eggo II cause I found it new for $60 shipped... so I jumped on it.
samis13
02-27-2003, 04:25 PM
ok, it doesnt really matter what it is, what is important is the feed rates, alex let me know when you get the triggers, and the valve. Thanks