newbie questions

[Live4Ever]

1. the BD's use cocker style (ball bearing) ball detents, right?

2. i have a brmc antichop bolt (for spyders) it has 10/32 threadings in the back and I want to get a high compact, will i be able to use this bolt in the high compact, cause on some sites i see bolts that say they dont work with the compact and high compact

basically, whats different about the bolts with the compacts and other models

3. can i take the flush cocking system off the stock bolt of a high compact and put it on my antichop bolt with 10/32 threadings?

[samis13]

i dont know about the bolt working in the compacts, but the bolt wont work with the flush cocking system. I dont know about the detents either

[Live4Ever]

Originally posted by samis13
i dont know about the bolt working in the compacts, but the bolt wont work with the flush cocking system. I dont know about the detents either

why not?

[samis13]

the flush cocking system uses 8/32

[kaibutsu]

(1) BD ball detents are threaded different than cocker detents.

(2)Only the COMPACT has a different bolt. All other BD's use the flush cocking system while the COMPACT uses a rear cocking bolt. If you want to keep flush cocking you will have to get a screw that is the correct length for flush cocking and the correct pitch for the bolt.

(3)Yes but you might want to make some type of guard for the cocking rod. A cocking rod to the mask will not be a pretty scene.:(

[BOB_IS_COOL]

at least not for the mask.

[kaibutsu]

Beavertail would be the correct term for the cocking rod guard.

[BOB_IS_COOL]

true.

[Live4Ever]

but isnt the point of flush cocking to not have a beaver tail?

[BOB_IS_COOL]

yes and so you can be a smaller target.