Evil LPR

[[X5] FLIP]

Does anyone here have an Evil LPR on their impy with the old boards (with the dwell pot)? I want to ask some questions.

[Spec]

i just finished installing my Evil LPR and Valve and Blade Trigger......=}

So happy now i just need a guage to so i could adjust and one question??

When i was shooting i hear a little sound like a Hissssh!!

eveytime i shoot what is that noise is it the Dwell?

I took my like about an 2 hours to do i had a few mistakes and some leaks than i just went over my mistakes, so basically if you know what u doing ur good if not read fourms or call e-paintballoutlet or local shops.

Evil LPR looks sick on IMpy's
Pics comin up soon...

[[X5] FLIP]

Hiss might be ur max bleeding off air... Im having problems with my maxy dropping off pressure when rapid firing and when im at 200max, 110lpr, I get less than 250fps, about 230fps average. Whats the lowest pressure guage they make?

[Spec]

the lowest LP guages ranges from 0-300 i saw in my local PB store. I will probably get that one for $20. Right know i don't have a guage so i can't adjust my LPR i just left the LPR adjustment screw all the way to the top until u see treads. i left my max-flo at 200Psi. this week i will go to a crono and do what ever i have to do like adjusting and fixing my Velocity. When i was shooting my gun dis morning damn it sounds nice and feel light. When i get it all adjusted it will save a lot of air on a 68/45.

[[X5] FLIP]

Im having trouble adjust my whole gun and i wasted so much paint. Have to go back this weekend, if I cant get it to work low pressure. Ill boost it up (so its pretty much useless)

[Spec]

i got to go this Sunday to chrono my impy.

[FOM]

I assume you have read the articals on how to set up your LPR? If not goto the mipaintball.com web site and look in the articals/faq. just print out the test file so you can take it along.

A gague on the LPR is prettymuch useless. ITs nice to be able to look at and say "see-- isn't that cool" but frankly you souldn't even care what the solenoid pressure is at. You are concerned with the INPUT pressure, then simply adjust the LPR pressure to get the veloicity range you want.

FOM