why???

[Tips98]

Why is my Tippy so unaccurate. I was shooting marbs, and i think the bore was the wrong size. even with good paint, my gun just sucks! i hate it. why is mine so much worse than my friends? Why is it happening?!?!?

[2-Cool-4-Life]

first of all, what barrel are you using? and if your using the stock barrel...then get a new one, the Custom products and Lapco Bigshot's are good choices....

[-=RA=-]

If you're still using the stock barrel, marbs are much too small. Try something like RPS Bigball, or Draxxus Inferno. Those should be bigger bore. Or invest in a better barrel such as a Lapco Bigshot, Smart Parts All American, or a Custom Product barrel. Those should shoot marbs very well.

[Meph]

"Not properly fitting your barrel to the paint is the cause for over 90% of velocity fluctuations in paintball guns."

- Bud Orr

[HoLyDrUnKmOnK]

i dont mean to sound blunt but, are you actually aiming?

like if you just hold and shoot 5 times you may move the gun, try putting it on a stand and checking it.

Then if its still crud , you need a new barrel or check your internals.

[Tips98]

Im using a J&J 14 ceramic
and yes i do aim, the balls cirve a lot, and its not me thats moving to make them curve. I did notice that the balls rolled outta the barrel. Its prolly just the bore size.

[SaVaC]

it also could be the barrel alignment. 98's are known for that since their course threads and clam shell design

[pEnNyWiSdOm225]

if they curve alot your velocity may be too high

[E r y k]

or your jj was defective... some jj's bores were messed up when produced.

[-=ReD-hAzE=-]

and if a defective barrel is the culprit... you could most likely get it replaced...

[Turambar]

Chrono your marker first, sounds like it could be too high (like penny said). Or like Eryk says it could be the barrel, but I wouldn't go with that right off. Try some paint that matches the barrel better and a lower velocity (if it is too high).