Springs

[MuffinMan14]

my black dragun is shooting like 245 max when i chrono. what spring kit do you guys recommend and is there anything else that has to do with it being so slow ???

thanks.

[krajoz]

just use any spyder spring kit almost any will do. also make sure its well lubed

[toolfan62]

it might not be getting enough air it happened to me on the gas fore grip there is a screw that you should twist out a little

[Zujin]

if ur using co2 and its cold, ur doin better than me, i can only get 240 when its cold. that could be ur prob

[ReaLe[e]LAZY]

Ya my gun was doing the same thing so i stretched the spring bringing it to 260, u can do that for now. My dad took mine down to the local shop and they fixed it, its about 290 now. I dont no wat they did cause i was at skool but take it to ur local shop and hav them fix it (mak sure they hav a chrono or all they are going to do is tell u to buy a new spring or hav u stretch it). Happened to me at another place

[MuffinMan14]

ya i fix my gun, i pull out the springs and loosen the screw till it stop leaking and now its shooting like 350 max and i put it to 280.

[GoalieKeg14]

hey guys,

I reccomend the maddman spring kit if you need a new valve spring. If you don't, Just get the CIP spring kit. Stop stretching your springs now! they will go back to original shape. I've gone through it before.

[kaibutsu]

32* also makes a spring kit that comes with valve springs. The CiP kit only has 6 main springs.

[GoalieKeg14]

Yeah Kaibutsu's right. I only reccomended the CIP kit for if you didn't need any valve springs. I actually have both kits. I ended up using the medium main spring in the Maddman kit so now I'm not using the CIP kit. And if you end up getting the CIP kit, you'll only end up using the three of the springs in the kit.

[ReaLe[e]LAZY]

Ya i used to hav to stretch the spring lik every couple of games i played

[kaibutsu]

I also bought the Maddmann and CiP spring kits since I have more than one marker. I want the 32* kit so I can tinker with the valve dwell on my LP Sniper a little more.

[Synchronium]

it could be the reg wasnt adjusted? and any spring kit will do

[Titan54]

Yea, last saturday i had to buy a new spring cause my stock one was soooo slow


I got the spider 32 degrees kit

now its super fast and maxes around 350 but i turn it down

im glad, i thought i was the only one having a problem w/ my spring

[kuku]

Where is this screw you guys are talking about?

:| :confused:

[MuffinMan14]

its in the middle of the reg but theres 2 of them find the one that is unscrewable.

[toolfan62]

you need the allen wrench that it came with use the biggest one to find it