HELP FAST!! lol

[Goober_AK]

HELP! ma tippy 98c its jus shooting 20 feet max and soft!,, and info would help but be quick ! ma idea is i need nitro for the ebolt (usin co2 atm) :pissed: HELP !!!!!:D

[SaVaC]

my idea is that your regulator is set for too low a pressure

[Goober_AK]

how do i adjust it becaus the place i bought it from came with a regualr 98c manual

[SaVaC]

I'm not framiliar with the reg that comes with the e-bolt... I'm sure some one on here is though :D

[Grim_Reaper999]

check your velocity

[2-Cool-4-Life]

i'm pretty sure u either have to set the dwell, or fix up the low pressure regulator

[-=ReD-hAzE=-]

i'm also pretty sure its the dwell... although i'm not familiar with ways to change it... i'm quite sure thats what it is...

[HoLyDrUnKmOnK]

i doubt anyone here has helped.
no offence guys.. i cant offer much more.
But dude call tippy support , i hear they are really nice :D

good luck

[-=ReD-hAzE=-]

Originally posted by HoLyDrUnKmOnK
i doubt anyone here has helped.
no offence guys.. i cant offer much more.
But dude call tippy support , i hear they are really nice :D

good luck telling him where the problem is coming from is considered help... isn't it..:confused:

[NickSeiler]

Originally posted by -=ReD-hAzE=-
telling him where the problem is coming from is considered help... isn't it..:confused:

Only if you're right. ;)

-N

[-=ReD-hAzE=-]

what are you talking about... i'm always right...

my previous idea was completely off... i've identified the problem now though... the discombobulator is misaligned and your aiptek eye regulator for it is misfiring... PM me and i'll give you my address... you can send it to me and i'll fix it for you... also send $35 for labor fees...:wink2:

[NickSeiler]

Originally posted by -=ReD-hAzE=-
what are you talking about... i'm always right...

my previous idea was completely off... i've identified the problem now though... the discombobulator is misaligned and your aiptek eye regulator for it is misfiring... PM me and i'll give you my address... you can send it to me and i'll fix it for you... also send $35 for labor fees...:wink2:

:laugh: :tup:

-N

[Ice]

Just call tippmann...then you'll get the correct answer for sure.

[Goober_AK]

lmao haze , i would send it to ya but my parents wont let me ....... so i'll just send it to tippmann , thnsx guys:D :cool: :P :crazy:

[Goober_AK]

man, im jus about to give up on my tippy and buy and a-5.:|

[NickSeiler]

Originally posted by Goober_AK
man, im jus about to give up on my tippy and buy and a-5.:|

:eyes:

-N

[Meph]

For the dwell, turn it ALL the way over to the left. After it's all left, turn it around 1/4 turn to the right. That is "optimum" dwell setting. Leave it there. Now you adjust your regulators.

Do you have a secondary regulator along with the e-bolt asa/low pressure regulator?

But with the E-bolts' LPR increase the pressure a bit at a time. Until you see some noticable increase in velocity.

You can also almost remove your velocity screw in the powertube. Not completely, but most of the way. It's now just there, it won't affect your velocity drastically.