....hmmmm....I need some help with this.

[Jivewriter]

Okay, I just got a new gun called the Spyder Imagine. Now it's a lot better than my stock Piranha VTL :boring:, but I need to know what is good and bad about this marker. The manual doesn't have what I need to understand it and no useful information on how it operates *Thinks about burning the manual because that's all it's good for*. Also I need a link to anything that will tell me how this gun or any blowback like it works.

If anyone can help me, I would gladly appreciate it! :)

*goes back to reading his gun manual*:pissed:

[egloskerry]

Well, first of all, it's a hybrid (as you probably know because you put it in the right forum : ) ) Now, it shoots nice and fast, and the fire mode and ROF are easy to change, but they are explained in your manual. The stock barrel is awfully accurate, but I'd recommend getting a CP 1 Piece for it. Take off the sight rail as it is good for nothing. You'll need a e-hopper for this, most likely a rico (I have heard the revvys are breaking their necks!) or reloader. As always, make sure to put teflon around all the hose threads. You may want to in/decrease the trigger pull, so just unscrew your grip frame and see the little screw at the top of the trigger? Unscrew to decrease pull, vice versa to increase. If you want a sight for it, buy a small fiber optic sight and stick it right between the ball detent and the feed neck. Another cool thing you can do since the grip panels are clear, you can paint them any colour of the rainbow! Make sure you paint the INSIDE of the panels, and scratch it up with some fine grit (400 or higher) sandpaper. Then just spray away with any colour you want! May wanna get a new bolt (delrin maybe, but for some reason a "plastic" bolt makes me feel cheap) and a reg. That's about it for this wonderful gun from Kingman!

[Jivewriter]

Originally posted by egloskerry
Well, first of all, it's a hybrid (as you probably know because you put it in the right forum : ) ) Now, it shoots nice and fast, and the fire mode and ROF are easy to change, but they are explained in your manual. The stock barrel is awfully accurate, but I'd recommend getting a CP 1 Piece for it. Take off the sight rail as it is good for nothing. You'll need a e-hopper for this, most likely a rico (I have heard the revvys are breaking their necks!) or reloader. As always, make sure to put teflon around all the hose threads. You may want to in/decrease the trigger pull, so just unscrew your grip frame and see the little screw at the top of the trigger? Unscrew to decrease pull, vice versa to increase. If you want a sight for it, buy a small fiber optic sight and stick it right between the ball detent and the feed neck. Another cool thing you can do since the grip panels are clear, you can paint them any colour of the rainbow! Make sure you paint the INSIDE of the panels, and scratch it up with some fine grit (400 or higher) sandpaper. Then just spray away with any colour you want! May wanna get a new bolt (delrin maybe, but for some reason a "plastic" bolt makes me feel cheap) and a reg. That's about it for this wonderful gun from Kingman!

Thanks man, that' helps a lot. :D Anyone else want to add anything to egloskerry's cool ideas?

[AK47]

Since my apprentice is getting a nitro tank, do you need a reg to run a 850preset? if co2 is unregulated then it shouldn't matter.


Bow down to me now:D