blowback

[OregonianBalla]

ok, i will be ordering my vapor bolt asap. but im gonig paintballing tomorrow and wanted to know if ther is anything i could do temporarily to cut down on the blowback. it pisses me off and i chop mad when i walk the trigger

[SPS16]

not really

[jwong]

Originally posted by OregonianBalla
ok, i will be ordering my vapor bolt asap. but im gonig paintballing tomorrow and wanted to know if ther is anything i could do temporarily to cut down on the blowback. it pisses me off and i chop mad when i walk the trigger

What's your operating pressure?

If possible, dial back a bit on the HPR. And increase the LPR setting to compensate. It may help a little. But I don't know if you'll notice the difference.

[Creeper]

Nope. Really nothing significant you can do.

[ShootPaint]

Cut some oring grooves in the stock bolt:D

By the time you pay a machinist to do that you could have purchased 10 Vapor bolts.

[JTramoDude]

something i see sometimes on blowback guns is a hole in the side of the feed-neck....small enough so it shouldn't mess up any feeding but will help with blowback a little bit.

think this is really worth it? i dont know, but i guess it's worth a try i u don mind drilling anything