where do i put the lithium grease???

[avm34adam]

okey i bought some white lithium grease (creamy) form where do i put it. im guessign just on the reg area but want to make sure with u guys

[ayzian]

you should put it on all of the o-rings

[jwong]

Originally posted by avm34adam
okey i bought some white lithium grease (creamy) form where do i put it. im guessign just on the reg area but want to make sure with u guys

Gregicd may correct me... and please do if I'm wrong.

The grease can be put thinly on the interior of the reg where the pistons slide. I guess you can also put a little where the cupseals sits in the reg.

Do not put any on the bolt.

[Mr. Kitty]

You use silicon lubricant on the bolt area right?

[Hoplon]

Take the ram out of the back of the gun and grease the shaft. That and the inside of the regulators is the only things i would use grease on.

Orings should have oil like goldcup applied. Leave the bolt dry.

[gregicd]

DO NOT PUT OIL ON YOUR ORINGS OR THE REST OF YOUR MARKER!!!! HOW MANY TIMES DO I HAVE TO SAY THIS???????
All you need to use is lithium. Put lithium on the orings.

To lube a BKO luge the both reg pistons(white things) and the orings. You do not need to take the Cylinder assembly apart

To lube a B2K you need to lube the reg pistons(white things) and the cylinder assembly.

On both markers you don't need to worry about lubing the bolt.