Ya! It arrived...Greg...help?

[ccrnnr9]

Ok, well I got my b2k3 (bought it used for a good deal). It is great, but it does have trigger bounce . I did take it out in the back yard, and it works well except for I do have some questions:

What would the best pressure to run the HPR at be? (on my old BKO, I found that 200psi was best)

The manual is blurred in the spot about adjusting the LPR. On my old BKO, I would put the HPR at 200psi, then turn the LPR in until it started to leak, then turn the screw out a 1/4-1/2 turn. How much do I turn the LPR out on my bushy?

Also, I know that the capacitator is the thing that causes the trigger bounce on the new b2k3s...is there anyway to remove that myself? I wouldnt just rip it off of course, but I have a ton of events coming up, and I cant afford to have ICD hold the gun forever. If not, do you know if Goldie or Shootpaint would fix the problem for me?...Both Shootpaint and Goldie's shop are about 1-2 hours away from me ( Iknow, its awesome! ). Also, has anyone sent their gun in to ICD to get trigger bounce fixed?...if so, how long did it take to get it back, round trip?

Lastly, is the 2k3 chaos chip out?...I keep hearing yes and no.

[JTramoDude]

well, for adjusting the lpr, theres 2 way to do it, the icd manual way (pretty much same for bko, b2k)... or what i do, turn it out till it doesnt cycle, then slowly turn it in till it shoots, then put another 1/4, 1/2 turn.

[ccrnnr9]

anybody know how to get the tray screws off? I have no allen wrench that fits em!

[JTramoDude]

its from the same set that fits every other screw... u may b missin one

[ccrnnr9]

ya, I know they are a 7/64 set, but I have a 12peice set, and none come with 7/64 allen wrench. The allen wrenches that came with it dont fit it either. I have called Home Depot, Sutherlands, Lowes, and even a custom tool maker, and nnone of them have ever heard of a 7/64 allen wrench!

[JTramoDude]

that cant be right, i have a 7/64 on my set!

[ccrnnr9]

what kind of set do you have, and where did you get it?....I need one bad! Thanks for the help JTramodude!

[JTramoDude]

its a Eklind set w/ 11 wrenches, i got it at my local hardware store. try calling home depot or a local store and asking if they carry them, even icd might send you out a 7/64th who knows.