Need Some Advice

[lukskywalker]

I have a Spyder Shutter. With this I use a DyeBoom Stick along with a 9volt hopper. I am very happy with this gun however I am always looking for better things to add to it. Does anyone know which is the best paint ball for my Gun along with where can I find a true Venturi Bolt(the one with the little holes in it)verses the stock bolt I have. I am in the mist of trying different paintballs to see which is truely the best.

[Ed]

hey man...you need to find out what bore size your gun is.....I shoot diablo paint so i'll go from there......if your barrel is large bore then try shooting diablo midnight or blaze....if it is standard bore try shooting diablo blaze or inferno....if it is small bore then try shooting diablo hellfire or hellfire darts
later....

[ptflyer]

before you go spending money on a new bolt...I would take the insert out of your stock bolt(free)...to make it more free flow...and take the money you saved and buy a turbo valve (about 2o bucks if not less)and a spring set(10 bucks) and run your shutter LP..(you already have the stock reg...which will work just fine for now)....oh yeah and drill out your ASA (free)...

Check out MTDreams FAQ it will tell you how to remove the venturi out of your bolt and how to drill out your ASA..

(I did all these things to my shutter and then some and would do it all agin in a second thats how much better it is)

[ptflyer]

sorry MTDreams is on a different board....but there is a tread here on how to do those things also...do a search for Drilling ASA ....and how to modify stock bolts....hope that helps....

[lukskywalker]

my barrel bore size is .688

[spacer709]

Hey PT, could you give a like to that site? I got a spyder shutter too.

[NickR]

The best bolt is the bob long cyclone bolt

[Jamez Bond]

You can find bolts at paintballonline.com, and millenium paintball has bore and paint sizes.

[shizocka]

Originally posted by lukskywalker
my barrel bore size is .688


.688 is standard size, thats what size my barrel is and i use marbs. go to http://www.lapcopaintball.com and they have a paint chart that says all of the paint and barrel sizes. it may help in your choice of paint.

[TLplus84]

best bolt is the Shocktech Delrin. it's quiet, efficient, and it looks cool :D

[ptflyer]

ok...well this is a link to a different site that is only about spyders.....alot of info and good stuff...

Not to say there isn't alot of good info right here on these boards...just do a search.....

http://www.spyder-faq-center.com/