Help with my Problem: Major Chopping

[Commando52]

Yesterday i shot around and i madly chopped...

-When i checked out where all the paint was, it was all in the feed tube and in the neck feed of my hopper.

-I thought to myself it has to be the hopper/feed tube match. (by the way i am using a 12v revvy w/ x board, a non-Vision rat jr., stock bolt, and a unidentified low rise)

-I have to use electrical tape around the neck of my hopper to make it snug in my feed tube, causing the neck of the hopper not to be in the feed tube flush and weighing it to one side. I have to use electrical tape because the feed tube is too big for the neck of the hopper to fit in smoothly

-This might be the problem correct?

-Would getting a new designz low rise and a evlutionII solve my problems? I would also get a new bolt along with that...

Someone, anyone, help me!

Many Thanks.

[fyse0]

the balls might be gettin caught on extra electric tape, u might be outshooting the hopper (your not going to pass 10bps consistently with 12v and not break)

its not the bolt

evo 2 will help a ton, dont get it w. out yboard

[heyheyhey]

12vt.

right theres your problem

solution:

egg or halo

[Impulse88]

it mightalso be the low rise theres less balls be waited to be loaded and i dont think they suggested if u just have a revy

[cocker kid 2k2]

Were you shooting fast when this happened? Odds are if you were you just outshot your loader, not uncommon for people with 12 volts. Get an Evolution and your problems will be solved, dont get a low rise without vision though, or a halo.

[Commando52]

Yes i was rapid firing and walking the trigger, i have a 2mm trigger pull, anymore information would be great

keep up the good work

[Awhislyle]

while you are probalby outshooting your hopper easy being that you have a low rise isnt helping it either, a new hopper would probably oslfve it, but maysure the tape isnt getting in the way either

[Woozer]

i think it's most likely the low rise, when i used my revvie on my nasty (and i forgot to turn vision on, lol) i was choppin like a mofo. But definitly, it's the tube, and a new force feed hopper would be kick arss, it'll really let ur impulse show it's stuff ojn the field, i can't wait for my Halo B :D ooooh, the force feed, lol, gotta love it

[EnderOSC]

Yeah its the low rise paired with the Revvy.

Solution 1: Get Vision, but make sure you get WAS when it comes out if you do this.

Solution 2: Get a Halo or Evo2, I would personally get the Evo2.

Solution 3. Get a High Rise. I wouldn't personally do this.

[heyheyhey]

new vision board

call sp.... and specify the "see all" board;)

[isaaclim]

when i had my impulse....vision was the only way to fly.

heyheyhey "the barney boy" is right on the money. the updated vision boards are the ones to get (and work AWESOME) if WAS is not out yet.

Isaac

[Commando52]

i figured it was the feed tube and hopper.... i think i am going to get a high rise, which do you recommend?

thanks again

[Impulse88]

get a "take off" rat highrise for 4 bucks at epo thats what i have

[heyheyhey]

Originally posted by Impulse88
get a "take off" rat highrise for 4 bucks at epo thats what i have

cant beat that

[thebluenu]

Originally posted by cocker kid 2k2
Were you shooting fast when this happened? Odds are if you were you just outshot your loader, not uncommon for people with 12 volts. Get an Evolution and your problems will be solved, dont get a low rise without vision though, or a halo.

ah yes, the good old "spend more money and it will be fixed" - sigh, paintball life....