PDA

View Full Version : What I'm thinking of now...


shibby
06-02-2003, 06:25 PM
I'm thinking of getting the following:

- Black Spyder Imagine = $120.00
- 20 oz. Co2 Tank = $20.00
- Black Revvy = $50.00
- Black V-Force Armour Mask = $20.00
- Black Smart Parts Progressive Spyder 12 inch Barrel = $35.00
- Silver 32* Flame Drop Forward = $28.00

Anything else I should add because this adds up to about $273.00 and I have $300 to spend. :)

--shibby~ :D

evilhomer
06-02-2003, 06:28 PM
Originally posted by shibby
I'm thinking of getting the following:

- Black Spyder Imagine = $120.00
- 20 oz. Co2 Tank = $20.00
- Black Revvy = $50.00
- Black V-Force Armour Mask = $20.00
- Black Smart Parts Progressive Spyder 12 inch Barrel = $35.00
- Silver 32* Flame Drop Forward = $28.00

Anything else I should add because this adds up to about $273.00 and I have $300 to spend. :)

--shibby~ :D

sounds good! Make sure you get some sort of anti fog for those goggles. Also, I'd get a Reloader instead of a revvy. Or spend a few bucks more and get a Ricochet.

shibby
06-02-2003, 06:30 PM
The ricochet AK? The AK might not keep up with me because I shoot fast and it's only 9v. The 2K is 12v but costs like $75.00 on pbgear.com. For that much, I can just get an eggy. :D

evilhomer
06-02-2003, 07:34 PM
That's what I meant, but still I'd get the Reloader because I heard the new Revvys are crap and break way too easily.

mistersuperfly
06-02-2003, 07:40 PM
use the remaining 27 bux to update that armour to a shield...

I highly doubt u will regret that...

iTz NyaGo
06-02-2003, 08:04 PM
both ak and 2k are both 9volts that can keep up with a revy, but the reloader is a little bit quicker than em. if a drop means that much to you go for it, but maybe you could lose the drop and use that extra money for a regulator?

evilhomer
06-02-2003, 08:10 PM
I dunno, a drop could be pretty efficient, but a reg is also a good idea. I'd stick with the drop for now and get a job or save up $$ over the summer, than get a regulator.

shibby
06-03-2003, 01:47 PM
Cool! Finally, I've decided on a set up! :D

#1UkrainianPBer
06-03-2003, 02:48 PM
Remember.. Taxes!

Is this before or after taxes?

shibby
06-03-2003, 04:19 PM
I don't know... I'm buying online and shipping is free so tax isn't an issue for me... :D

xLiLHockeyFreak
06-03-2003, 04:54 PM
Change that Imagine to an E99 and it will really be awesome.

iTz NyaGo
06-03-2003, 05:29 PM
isn't the main difference b/w an e-99 and imagine the IPI trigger frame rather than the ESP? i mean eventually, all the internals will be changed so wouldn't buying the e-99 sorta be a waste of money?

#1UkrainianPBer
06-03-2003, 05:38 PM
E99 is rear cocking.... the imagine is "Vizion cocking.. which breaks alot of balls (From my experience)

thepeashooter
06-03-2003, 05:47 PM
For the drop head up to your home hardware or w/e buy a piece of flat bar(flat steal rods)

bring it home measure it up to the size of drop you want, take a hammer and bend the ends then drill holes through it and then attach itr to your gun and you have a $3 drop forward..

Thats what I did yesterday. I haven't played with it yet but it holds my 20 oz co2 tank full, perfectly with out any flex or wobbling..and ive tried running with it and shaking it