BKO Trouble Help!

[sportmaned]

My BKO is leaking rite by the trigger frame, i have about 200 psi left in my tank, wen the tank runs low does the gun hiss? thx and wut do u think is wrong and how do i take apart the bottom part under the bolt? thx

[The Sniper]

It might be the solenoid leaking. Try adjusting your lpr. because if its screwed in all the way to much pressure is going in so just turn it down.

[Grim_Reaper999]

i think i know what it is i just did the same with mine ok get some allen wrenches and unscrew the bottom part of your gun. when you pull it apart there will be some wires and a black thing connected to a piece of mettle. the black thing is the soleniod. so after you find it get a small screw driver and unscrew the back plate of the solenoid. there will be a spring and a gasket around it. pull out the spring and there will be a cylinder shaped (i guess it would be a small type of bolt it has like 4-5 o-rings on it. when you get that out wipe all of the lube on it and wipe out where it was in. put oil on it and put it all back together. you gun will be as good as new....try the post above me first and if it does not work or you just get tired of trying that do this it is most likely the problem. i just did this last night to mine and it works fine today.

if you have any ?'s PM me ok.

[sportmaned]

sweet Grim Reaper thanks for the help both of you!

[Fignewt]

Eddie is that you?

[Grim_Reaper999]

did it work? j/w

[sportmaned]

Hey Brian

[sportmaned]

yes it did but i cant get my gun to be consistant, like one shot will be 272 then the next will maybe even be like 148, wut do u think this could be?

[The Sniper]

Its probably the stock regulator or you dont have it set very well. Wat are u runnin at?

[sportmaned]

225 psi, i would take one shot and it would sometimes jump way down to about 120, then take another shot and jump bak up do u think it can be my tank i have the Pure Energy 48/3k tank and i hear they have problems with the BKO

[gregicd]

you need to lube your Hpr plunger.

[sportmaned]

so i can use like the blue pmi gun oil for like spyders and blowback guns?

[gregicd]

You need to use a lithium grease. DO NOT USE OIL IN THIS MARKER!!! Go to your local Paintball shop they should have some lithium grease you can purchase.

[dpieper002007]

will silicon based oil work for it also.?!?!?!!

[sportmaned]

^^^^^^^^^^^^^^^^^^^^^?

[jwong]

Originally posted by dpieper002007
will silicon based oil work for it also.?!?!?!!

I'm pretty sure... No.

Stick with White Lithium grease.

I found some in a local hardware store in the automotive department.

Cheers

[funky monkey 07]

grimreaper i had the exact same problem and i did what u said to do tonight and so far there r no leaks YAY!!!! i was realy woried cuz im leaving for a game next weekend and then it suddely stated to lea but i did what i said to do and its fine now im going to see what happens in the morn. and ee if its still ok thnx for the reply even tho i didnt start this thread