Dual Regs a must?

[eastcoastplayer]

I went to the my shop to look at the BKO's (as I always do). I have never asked the owner about them becase I know a lot from here. So I decided to ask him about the BKO and he said that you have to have a dual reg set-up or it will hurt the soleniod. Anyone else hear this or can confirm this? Thanks

[manbot]

with the stock reg and the reg on the tank you should be fine

[ImpYa]

If you are running anti-siphon co2 a dual reg setup up such as a female stabilizer and an another reg is recommended, but running a male palmers stabilizer is fine also.

If you are running nitro then you can run just a single reg.

L8ter

ImpYa

[bsucaptainbilly]

these guys are thinking after-market.

here is the jist.

any stock BKO has a dual reg setup.

a High pressure regulator, and a low pressure regulator

the hpr is the big cylinder that looks like a foregrip

the lpr is the stumpy cylinder behind it

the lpr feeds the solinoid with air and that is what pushes the bolt/hammer assembly forward to hit the valve and shoo the ball.

[ayzian]

Don't worry, just buy a nitro tank, gas it up, set up the regs correctly, and lay down the paint.

[ImpYa]

Originally posted by ayzian
Don't worry, just buy a nitro tank, gas it up, set up the regs correctly, and lay down the paint.

:nod: :nod: :nod:

[bsucaptainbilly]

yup, yup.

ImpYa and azyain are totally right.

[eastcoastplayer]

Originally posted by bsucaptainbilly
these guys are thinking after-market.

yeah they were he suggested an ans, vigilante, or gladiator for the HPR. For the secondary reg he said thor or female stabilizer.
And all that other stuff like what the HPR and LPR is I already know.I hope I can get A BKO soon:|